We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI FJCS-H1214, contact FAMAGA, the world's top producer of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are symbolized in the quality of products and particular attention to each buyer. We admire everyone, who engaged with us - therefore, our regular consumers receive the most acceptable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Portugal, Syria, Croatia, San Marino, Netherlands, Bangladesh, Guyana, Papua New Guinea, Togo, Qatar, Mexico, Nicaragua, Liberia, United States, Dominica, Austria, Honduras, Ghana, East Timor, Laos, Serbia, Nepal, Guatemala, Paraguay, Angola, Singapore, Finland, Luxembourg, Ukraine, Burkina Faso, Ecuador, Slovakia, Ireland, South Korea, Kuwait, El Salvador, Albania, Thailand, Cyprus, Israel, Zimbabwe, Kiribati, Mauritania, Latvia, Kyrgyzstan, Estonia, Iran, Jamaica, Tunisia, Indonesia, North Korea. A well-built logistics network and a partnership network allow us to dispatch our units anywhere in the earth as soon as possible without discrediting product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as to stay on the top.
To inquire or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | Material | Hardness | Surface Treatment | |||||||||
Set | Connector only | Flange only | Flange | Connector | ||||||||
Standard | Separate | Wrench Flats | L Fixed | L Configurable | Standard | Separate | Wrench Flats | |||||
Standard | FJA | FJB | FJC | FJCN | FJCNL | FJA-H | FJB-H | FJC-H | EN 1.1191 Equiv. | 45~55HRC | Section, 45 ~ 50HRC Induction Hardened Surface | Black Oxide |
FJAS | FJBS | FJCS | FJCNS | FJCNSL | FJAS-H | FJBS-H | FJCS-H | EN 1.4125 Equiv. * | - | |||
Space Saving | FJUA | FJUB | FJUC | FJUN | - | FJUA-H | FJUB-H | FJUC-H | EN 1.1191 Equiv. | Black Oxide | ||
FJUAS | - | FJUCS | FJUNS | - | FJUAS-H | FJUBS-H | FJUCS-H | EN 1.4125 Equiv. * | - |
Part Number | - | L |
FJCNL10 | - | 50 |
Part Number |
FJA10 FJUB-H12 |
Part Number | Mount Flanges | |||||||||||||||||||||
Standard | Space Saving | |||||||||||||||||||||
Type | M | A | D1 | D2 | t | F | P.C.D. | d | d1 | H1 | E | G | A | D1 | D2 | t | F | P.C.D. | d | d1 | H1 | E |
Standard Standard FJA FJAS Standard Space Saving FJUA FJUAS Separate Standard FJB FJBS Separate Space Saving FJUB Wrench Flats Standard FJC FJCS Wrench Flats Space Saving FJUC FJCUS | 3 | 42 | 18 | 13 | 5 | 10 | 30 | 4.5 | 8 | 5 | 24 | 30 | - | - | - | - | - | - | - | - | - | - |
4 | 42 | 18 | 13 | 5 | 10 | 30 | 4.5 | 8 | 5 | 24 | 30 | - | - | - | - | - | - | - | - | - | - | |
5 | 48 | 20 | 15 | 6 | 12 | 34 | 6 | 9.5 | 5.5 | 28 | 34 | 34 | 17 | 13 | 5 | 11 | 24 | 4.5 | 8 | 5 | 22 | |
6 | 48 | 20 | 15 | 6 | 12 | 34 | 6 | 9.5 | 5.5 | 28 | 34 | 34 | 17 | 13 | 5 | 11 | 24 | 4.5 | 8 | 5 | 22 | |
8 | 51 | 24 | 17 | 8 | 16 | 37 | 7 | 11 | 6 | 30 | 37 | 40 | 23 | 17 | 5 | 11 | 30 | 4.5 | 8 | 5 | 25 | |
10 | 54 | 28 | 21 | 8 | 16 | 40 | 7 | 11 | 6 | 32 | 40 | 40 | 23 | 17 | 5 | 11 | 30 | 4.5 | 8 | 5 | 25 | |
12 | 70 | 36 | 27 | 10 | 20 | 52 | 10 | 14 | 8 | 42 | 52 | 52 | 32 | 24 | 5.5 | 12 | 40 | 6 | 9.5 | 5.5 | 34 | |
14 | 70 | 36 | 27 | 10 | 20 | 52 | 10 | 14 | 8 | 42 | 52 | 52 | 32 | 24 | 5.5 | 12 | 40 | 6 | 9.5 | 5.5 | 34 | |
16 | 90 | 46 | 35 | 12 | 24 | 68 | 12 | 17.5 | 10 | 54 | 68 | 62 | 39 | 31 | 8 | 16 | 48 | 7 | 11 | 6 | 41 | |
18 | 90 | 46 | 35 | 12 | 24 | 68 | 12 | 17.5 | 10 | 54 | 68 | 62 | 39 | 31 | 8 | 16 | 48 | 7 | 11 | 6 | 41 | |
20 | 106 | 56 | 44 | 15 | 30 | 80 | 14 | 20 | 12 | 66 | 80 | 74 | 46 | 36 | 10 | 20 | 58 | 10 | 14 | 8 | 48 | |
22 | 106 | 56 | 44 | 15 | 30 | 80 | 14 | 20 | 12 | 66 | 80 | 74 | 46 | 36 | 10 | 20 | 58 | 10 | 14 | 8 | 48 | |
24 | 116 | 66 | 53 | 16 | 32 | 86 | 14 | 20 | 12 | 78 | 86 | 80 | 52 | 42 | 12 | 24 | 64 | 10 | 14 | 8 | 54 | |
26 | 116 | 66 | 53 | 16 | 32 | 86 | 14 | 20 | 12 | 78 | 86 | 80 | 52 | 42 | 12 | 24 | 64 | 10 | 14 | 8 | 54 | |
30 | 134 | 74 | 59 | 18 | 40 | 104 | 18 | 26 | 18 | 80 | 104 | 90 | 62 | 52 | 16 | 32 | 74 | 10 | 14 | 8 | 64 | |
36 | 134 | 74 | 59 | 18 | 40 | 104 | 18 | 26 | 18 | 80 | 104 | - | - | - | - | - | - | - | - | - | - |
Part Number | Cylinder Connector | ||||||||||||||||||
Standard | Space Saving | ||||||||||||||||||
Type | M | MxPitch | ? | L | D | H | T | W | L1 | SR | MxPitch | ? | L | D | H | T | W | L1 | SR |
Standard Standard FJA FJAS Standard Space Saving FJUA FJUAS Separate Standard FJB FJBS Separate Space Saving FJUB Wrench Flats Standard FJC FJCS Wrench Flats Space Saving FJUC FJCUS | 3 | 3x0.5 | 6 | 15 | 12 | 17 | 5 | 10 | 6 | 40 | - | - | - | - | - | - | - | - | - |
4 | 4x0.7 | 8 | 15 | 12 | 17 | 5 | 10 | 6 | 40 | - | - | - | - | - | - | - | - | - | |
5 | 5x0.8 | 10 | 20 | 14 | 19 | 6 | 12 | 8 | 50 | 5x0.8 | 10 | 17 | 12 | 16 | 5 | 10 | 6 | 50 | |
6 | 6x1.0 | 12 | 20 | 14 | 19 | 6 | 12 | 8 | 50 | 6x1.0 | 12 | 20 | 12 | 16 | 5 | 10 | 6 | 50 | |
8 | 8x1.25 | 14 | 25 | 16 | 23 | 8 | 14 | 10 | 60 | 8x1.25 | 14 | 23 | 16 | 22 | 5 | 13 | 8 | 60 | |
10 | 10x1.25 | 15 | 25 | 20 | 27 | 8 | 17 | 10 | 60 | 10x1.25 | 15 | 25 | 16 | 22 | 5 | 13 | 8 | 60 | |
12 | 12x1.25 | 18 | 35 | 25 | 34 | 10 | 22 | 12 | 100 | 12x1.25 | 18 | 29 | 22 | 30 | 5.5 | 19 | 10 | 100 | |
14 | 14x1.5 | 21 | 35 | 25 | 34 | 10 | 22 | 12 | 100 | 14x1.5 | 21 | 33 | 22 | 30 | 5.5 | 19 | 10 | 100 | |
16 | 16x1.5 | 24 | 45 | 32 | 43 | 12 | 27 | 15 | 100 | 16x1.5 | 24 | 37 | 28 | 36 | 8 | 21 | 12 | 100 | |
18 | 18x1.5 | 27 | 45 | 32 | 43 | 12 | 27 | 15 | 100 | 18x1.5 | 27 | 41 | 28 | 36 | 8 | 21 | 12 | 100 | |
20 | 20x1.5 | 30 | 55 | 40 | 52 | 15 | 32 | 18 | 200 | 20x1.5 | 30 | 46 | 32 | 42 | 10 | 26 | 15 | 200 | |
22 | 22x1.5 | 33 | 55 | 40 | 52 | 15 | 32 | 18 | 200 | 22x1.5 | 33 | 50 | 32 | 42 | 10 | 26 | 15 | 200 | |
24 | 24x1.5 | 36 | 60 | 49 | 62 | 16 | 41 | 23 | 200 | 24x1.5 | 36 | 55 | 38 | 48 | 12 | 32 | 16 | 200 | |
26 | 26x1.5 | 39 | 60 | 49 | 62 | 16 | 41 | 23 | 200 | 26x1.5 | 39 | 60 | 38 | 48 | 12 | 32 | 16 | 200 | |
30 | 30x1.5 | 43 | 65 | 54 | 69 | 18 | 46 | 24 | 250 | 30x1.5 | 43 | 65 | 48 | 58 | 16 | 36 | 18 | 250 | |
36 | 36x1.5 | 45 | 65 | 54 | 69 | 18 | 48 | 24 | 250 | 30x1.5 | 43 | 65 | 48 | 58 | 16 | 36 | 18 | 250 |
Part Number | L | Compliance with Standard | |||||
Type | M | Fixed | Configurable (1mm Increment) | FJCN | FJCNS | FJCNL | FJCNSL |
L Fixed FJCN FJCNS L Configurable FJCNL FJCNSL | 3 | 15 | - | ? | ? | - | - |
4 | 15 | ? | ? | - | - | ||
5 | 20 | ? | ? | - | - | ||
6 | 20 | ? | ? | - | - | ||
8 | 25 | 30~60 | ? | ? | ? | ? | |
10 | 25 | ? | ? | ? | ? | ||
12 | 35 | 40~80 | ? | ? | ? | ? | |
14 | 35 | ? | ? | ? | ? | ||
16 | 45 | 50~100 | ? | ? | ? | ? | |
18 | 45 | ? | ? | ? | ? | ||
20 | 55 | 60~100 | ? | ? | ? | ? | |
22 | 55 | ? | ? | ? | ? | ||
24 | 60 | ? | ? | ? | - | ||
26 | 60 | ? | ? | ? | - | ||
30 | 65 | ? | ? | ? | - | ||
36 | 65 | ? | - | - | - |
Part Number | Compliance with Standard | ||||||
Type | M | FJA-H | FJB-H | FJC-H | FJAS-H | FJBS-H | FJCS-H |
Standard FJA-H FJAS-H Separate FJB-H FJBS-H Wrench Flats FJC-H FJCS-H | 3 | ? | ? | ? | ? | ? | ? |
4 | ? | ? | ? | ? | ? | ? | |
5 | ? | ? | ? | ? | ? | ? | |
6 | ? | ? | ? | ? | ? | ? | |
8 | ? | ? | ? | ? | ? | ? | |
10 | ? | ? | ? | ? | ? | ? | |
12 | ? | ? | ? | ? | ? | ? | |
14 | ? | ? | ? | ? | ? | ? | |
16 | ? | ? | ? | ? | ? | ? | |
18 | ? | ? | ? | ? | ? | ? | |
20 | ? | ? | ? | ? | ? | ? | |
22 | ? | ? | ? | ? | ? | ? | |
24 | ? | ? | ? | ? | ? | ? | |
26 | ? | ? | ? | ? | ? | ? | |
30 | ? | ? | ? | ? | ? | ? | |
36 | ? | ? | ? | - | - | - |
Part Number | Compliance with Standard | ||
Type | M | FJUN | FJUNS |
FJUN FJUNS | 5 | ? | ? |
6 | ? | ? | |
8 | ? | ? | |
10 | ? | ? | |
12 | ? | ? | |
14 | ? | ? | |
16 | ? | ? | |
18 | ? | ? | |
20 | ? | ? | |
22 | ? | ? | |
24 | ? | ? | |
26 | ? | ? | |
30 | ? | ? |
Part Number | Compliance with Standard | ||||||
Type | M | FJUA-H | FJUAS-H | FJUB-H | FJUBS-H | FJUC-H | FJUCS-H |
Standard FJUA-H FJUAS-H Separate FJUB-H FJUBS-H Wrench Flats FJUC-H FJUCS-H | 5 | ? | ? | ? | ? | ? | ? |
6 | ? | ? | ? | ? | ? | ? | |
8 | ? | ? | ? | ? | ? | ? | |
10 | ? | ? | ? | ? | ? | ? | |
12 | ? | ? | ? | ? | ? | ? | |
14 | ? | ? | ? | ? | ? | ? | |
16 | ? | ? | ? | ? | ? | ? | |
18 | ? | ? | ? | ? | ? | ? | |
20 | ? | ? | ? | ? | ? | ? | |
22 | ? | ? | ? | ? | ? | ? | |
24 | ? | ? | ? | ? | ? | ? | |
26 | ? | ? | ? | ? | ? | ? | |
30 | ? | ? | ? | ? | ? | ? |