We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HFMDA-AMB-A[25-200/0.1]-B[10-200/0.1]-T[5-30/0.1]
Description
6 Surface Milled Mounting Plates/Brackets
Stock availability:
On request
If you are looking for MISUMI HFMDA-AMB-A[25-200/0.1]-B[10-200/0.1]-T[5-30/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of products and personalseparate attention to each consumer. We value everyone, who engaged with us - so, our regular clients pick up the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Chile, Pakistan, Palestine, Colombia, Dominica, Chad, Ireland, Argentina, Oman, Romania, Mauritania, Guyana, Uzbekistan, Greece, Syria, Libya, Costa Rica, Brazil, Liberia, Mauritius, Nicaragua, China, Malaysia, Armenia, Namibia, Netherlands, Egypt, Togo, Denmark, Bolivia, Botswana, Yemen, Philippines, Angola, Georgia, Russia, Albania, Paraguay, Nepal, Macedonia, Seychelles, Brunei, Burkina Faso, Cameroon. A advanced logistics network and a partnership network help us to conduct our goods anywhere in the globe immediately without undermining product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To get some advice or order, contact us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Type | Material Symbol | ||
HFMDA | SC | EN 1.1191 Equiv. | - |
SCB | Black Oxide | ||
SCM | Electroless Nickel Plating | ||
AM | EN AW-5052 Equiv. | - | |
AMW | Anodize (Clear) | ||
AMB | Anodize (Black) | ||
SU | EN 1.4301 Equiv. | - |
Part Number | - | A | - | B | - | T | - | X | - | V | - | Y | - | W | - | Hole Specification Code, Nominal Value | - | K | - | L | - | H | - | D | - | F | - | S | - | G | - | Hole Specification Code, Nominal Value | - | J | ||
Type | - | Material Symbol | ||||||||||||||||||||||||||||||||||
HFMCC | - | AMB | - | A100 | - | B80 | - | T10 | - | X15 | - | V70 | - | Y10 | - | W60 | - | Z6 | - | L50 | - | H40 | - | D30 | - | F50 | - | MA6 |
Part Number | 0.1mm Increment | X | V | Y | W | Hole Specification | L | F | S | G | Hole Specification |
Type | Material Symbol | A | B | T | Code | Nominal Dia. | Code | Nominal Dia. | |||
HFMDA | SC SCB SCM AM AMW AMB SU | 25.0 ~ 200.0 | 10.0 ~ 200.0 | 3.0 ~ 30.0 | 0.1mm Increment | N M Z For the machining dimensions, see Hole Type Selection Chart. | 0 (No Hole) 3 4 5 6 8 10 12 14 16 | 0.1mm Increment | NA MA ZF ZB For the machining dimensions, see Hole Type Selection Chart. | 0 (No Hole) 3 4 5 6 8 10 12 14 16 | |
For AMW and AMB, T≥5 For SU, T≤25.0 |