We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
G-BMZASA3-Q5-G5
Description
Manifold Hydraulic/Pneumatic/Outlets 1 Side/1 Inlet
Stock availability:
On request
If you are looking for MISUMI G-BMZASA3-Q5-G5, catch up with FAMAGA, the world's chief distributor of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are symbolized in the quality of products and personalseparate attention to each buyer. We admire everyone, who worked with us - thus, our regular purchasers bring in the most beneficial purchase conditions and discounts on the industrial equipment market. At present, there are more than 4500 such consumers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Sierra Leone, Guinea-Bissau, Chile, Dominica, Colombia, Cuba, Finland, Guyana, North Korea, Italy, Monaco, Palestine, Australia, Botswana, Eritrea, Serbia, Tonga, Pakistan, Azerbaijan, United States, India, Niger, Grenada, Burkina Faso, Namibia, Gambia, South Korea, Mongolia, Ireland, Panama, Brunei, Russia, Swaziland, Egypt, Kiribati, El Salvador, Bulgaria, Peru, Sudan, Luxembourg, Madagascar, Mozambique, Cape Verde, Latvia, Nepal, Kyrgyzstan. A well-built logistics bond and a partnership network help us to dispatch our goods anywhere in the world immediately without discrediting product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as to stay on the top.
To ask a question or make a request, phone us or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Usage | Type | Material | Surface Treatment | Max. Operating Pressure | ||||||||||
Pitch (P) Standard | Pitch (P) Configurable | |||||||||||||
25x32 Sq. | 30x35 Sq. | 15 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | 25x32 Sq. | 30x35 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | ||||
Hydraulic | BMZS | BMZF | - | - | - | - | - | BMZFP | - | - | - | EN 1.0038 Equiv. | Trivalent Chromate | 20.6MPa≈210kgf/cm2 or less |
BMZSM | BMZFM | - | - | - | - | BMZSMP | BMZFMP | - | - | - | Electroless Nickel Plating | |||
BMZSR | BMZFR | - | - | - | - | BMZSRP | BMZFRP | - | - | - | EN 1.4301 Equiv. | - | ||
Pneumatic | - | - | BMZAS | BMZAFC | BMZAF | BMZAFL | - | - | BMZAFCP | BMZAFP | BMZAFLP | EN AW-5052 Equiv. | - | 1MPa≈10kgf/cm2 or less |
- | - | BMZASA | BMZAFCA | BMZAFA | BMZAFLA | - | - | BMZAFCAP | BMZAFAP | BMZAFLAP | Clear Anodize |
Part Number | - | Q | - | G | - | P | ||
BMZF4 BMZFP3 G-BMZFP3 | - - - | Q1 Q2 Q2 | - - - | G2 G2 G2 | - - | P30 P30 | (G Thread) |
Part Number | Rc (PT), M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of Q and G Threads | A | B | E | F | X | Y | Mounting Hole Dimension | |||||
Type | Number of Circuits | Q | G | Standard | Configurable 1mm Increment | d | D | h | ||||||||
Hydraulic (25x32 Sq.) | 1 | 1 (1/8) 2 (1/4) | 1 (1/8) 2 (1/4) | 25 | 20~50 Specify within NxP≤140. | 0 | 2 | 25 | 32 | 20 | 20 | 15 | 6 | 5.5 | 9.5 | 5.5 |
Pitch Standard BMZS BMZSM BMZSR | Pitch Configurable BMZSMP BMZSRP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 | ||||||||||||||
Hydraulic (30x35 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) | 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) | 35 | 25~50 Specify within NxP≤120. | 0 | 2 | 30 | 35 | 25 | 22 | 15 | 7 | 6.6 | 11 | 6.5 |
Pitch Standard BMZF BMZFM BMZFR | Pitch Configurable BMZFP BMZFMP BMZFRP | 2 | 1 | 3 | 20 | |||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 30 | 4 | 6 | |||||||||||||
Pneumatic (15 Sq.) | 1 | M3 (M3) M4 (M4) 5 (M5) | 5 (M5) | 15 | - | 0 | 2 | 15 | 15 | 15 | 10 | 5 | 3.5 | 4.3 | - | - |
Pitch Standard BMZAS BMZASA | 2 | 1 | 3 | |||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 | ||||||||||||||
Pneumatic (20 Sq.) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5)* | 1 (1/8) 5 (M5)* | 15 | 15~50 When 5 (M5) is selected for G, specify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. | 0 | 2 | 20 | 20 | 20 | 13 | 5 | 4 | 5.5 | - | - |
Pitch Standard BMZAFC BMZAFCA | Pitch Configurable BMZAFCP BMZAFCAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5* | 4 | 6 | ||||||||||||||
Pneumatic (30 Sq.) | 1 | 1 (1/8) 2 (1/4) 5 (M5)* | 1 (1/8) 2 (1/4) 5 (M5)* | 25 | 20~50 When 5 (M5) is selected for G, spwecify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. When 1(1/8) or 2 (1/4) is selected for G, specify within NxP≤130. | 0 | 2 | 30 | 30 | 20 | 20 | 7.5 | 7 | 5.5 | 9.5 | 5.5 |
Pitch Standard BMZAF BMZAFA | Pitch Configurable BMZAFP BMZAFAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5* | 4 | 6 | ||||||||||||||
Pneumatic (40 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) | 2 (1/4) 3 (3/8) 4 (1/2) | 30 | 25~50 specify within N+P≤130 | 0 | 2 | 40 | 40 | 25 | 25 | 7 | 7 | 6.6 | 11 | 6.5 |
Pitch Standard BMZAFL BMZAFLA | Pitch Configurable BMZAFLP BMZAFLAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 |