We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BMZAS3-Q5-G5
Description
Manifold Hydraulic/Pneumatic/Outlets 1 Side/1 Inlet
Stock availability:
On request
If you are pursuing MISUMI BMZAS3-Q5-G5, catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of products and special attention to each consumer. We admire everyone, who collaborated with us - therefore, our regular buyers accept the most favorable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such consumers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Brunei, Croatia, Sri Lanka, Canada, Luxembourg, Cuba, Bhutan, Mexico, Uganda, Serbia, Czech Republic, Bolivia, United States, Eswatini, Sudan, Vietnam, El Salvador, Slovakia, Pakistan, Indonesia, Suriname, Morocco, Japan, Nicaragua, East Timor, Russia, Central African Republic, Angola, Nepal, Burkina Faso, Peru, Denmark, Tajikistan, Montenegro, Finland, Bosnia and Herzegovina, Benin, Thailand, Costa Rica, Syria, Mozambique, Malta, Djibouti, Malaysia. A well-elaborated logistics network and a partnership network let us to send our items anywhere in the earth quickly without undermining product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is ascending every day. We are proud that clients choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or book, call us by phone or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Usage | Type | Material | Surface Treatment | Max. Operating Pressure | ||||||||||
Pitch (P) Standard | Pitch (P) Configurable | |||||||||||||
25x32 Sq. | 30x35 Sq. | 15 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | 25x32 Sq. | 30x35 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | ||||
Hydraulic | BMZS | BMZF | - | - | - | - | - | BMZFP | - | - | - | EN 1.0038 Equiv. | Trivalent Chromate | 20.6MPa≈210kgf/cm2 or less |
BMZSM | BMZFM | - | - | - | - | BMZSMP | BMZFMP | - | - | - | Electroless Nickel Plating | |||
BMZSR | BMZFR | - | - | - | - | BMZSRP | BMZFRP | - | - | - | EN 1.4301 Equiv. | - | ||
Pneumatic | - | - | BMZAS | BMZAFC | BMZAF | BMZAFL | - | - | BMZAFCP | BMZAFP | BMZAFLP | EN AW-5052 Equiv. | - | 1MPa≈10kgf/cm2 or less |
- | - | BMZASA | BMZAFCA | BMZAFA | BMZAFLA | - | - | BMZAFCAP | BMZAFAP | BMZAFLAP | Clear Anodize |
Part Number | - | Q | - | G | - | P | ||
BMZF4 BMZFP3 G-BMZFP3 | - - - | Q1 Q2 Q2 | - - - | G2 G2 G2 | - - | P30 P30 | (G Thread) |
Part Number | Rc (PT), M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of Q and G Threads | A | B | E | F | X | Y | Mounting Hole Dimension | |||||
Type | Number of Circuits | Q | G | Standard | Configurable 1mm Increment | d | D | h | ||||||||
Hydraulic (25x32 Sq.) | 1 | 1 (1/8) 2 (1/4) | 1 (1/8) 2 (1/4) | 25 | 20~50 Specify within NxP≤140. | 0 | 2 | 25 | 32 | 20 | 20 | 15 | 6 | 5.5 | 9.5 | 5.5 |
Pitch Standard BMZS BMZSM BMZSR | Pitch Configurable BMZSMP BMZSRP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 | ||||||||||||||
Hydraulic (30x35 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) | 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) | 35 | 25~50 Specify within NxP≤120. | 0 | 2 | 30 | 35 | 25 | 22 | 15 | 7 | 6.6 | 11 | 6.5 |
Pitch Standard BMZF BMZFM BMZFR | Pitch Configurable BMZFP BMZFMP BMZFRP | 2 | 1 | 3 | 20 | |||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 30 | 4 | 6 | |||||||||||||
Pneumatic (15 Sq.) | 1 | M3 (M3) M4 (M4) 5 (M5) | 5 (M5) | 15 | - | 0 | 2 | 15 | 15 | 15 | 10 | 5 | 3.5 | 4.3 | - | - |
Pitch Standard BMZAS BMZASA | 2 | 1 | 3 | |||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 | ||||||||||||||
Pneumatic (20 Sq.) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5)* | 1 (1/8) 5 (M5)* | 15 | 15~50 When 5 (M5) is selected for G, specify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. | 0 | 2 | 20 | 20 | 20 | 13 | 5 | 4 | 5.5 | - | - |
Pitch Standard BMZAFC BMZAFCA | Pitch Configurable BMZAFCP BMZAFCAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5* | 4 | 6 | ||||||||||||||
Pneumatic (30 Sq.) | 1 | 1 (1/8) 2 (1/4) 5 (M5)* | 1 (1/8) 2 (1/4) 5 (M5)* | 25 | 20~50 When 5 (M5) is selected for G, spwecify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. When 1(1/8) or 2 (1/4) is selected for G, specify within NxP≤130. | 0 | 2 | 30 | 30 | 20 | 20 | 7.5 | 7 | 5.5 | 9.5 | 5.5 |
Pitch Standard BMZAF BMZAFA | Pitch Configurable BMZAFP BMZAFAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5* | 4 | 6 | ||||||||||||||
Pneumatic (40 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) | 2 (1/4) 3 (3/8) 4 (1/2) | 30 | 25~50 specify within N+P≤130 | 0 | 2 | 40 | 40 | 25 | 25 | 7 | 7 | 6.6 | 11 | 6.5 |
Pitch Standard BMZAFL BMZAFLA | Pitch Configurable BMZAFLP BMZAFLAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 |