We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BMZAS2-Q5-G5
Description
Manifold Hydraulic/Pneumatic/Outlets 1 Side/1 Inlet
Stock availability:
On request
If you are seeking MISUMI BMZAS2-Q5-G5, call FAMAGA, the world's dominant provider of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and private attention to each customer. We praise everyone, who conspired with us - therefore, our regular consumers receive the most convenient purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Yemen, Malaysia, Italy, Serbia, Bahamas, Grenada, Afghanistan, Bangladesh, Peru, Libya, Togo, Ireland, Tanzania, Equatorial Guinea, Switzerland, Angola, Chile, Botswana, Oman, Brunei, Sweden, Suriname, Monaco, Mauritius, El Salvador, Uganda, The Gambia, Morocco, South Korea, Albania, Eswatini, Fiji, Bulgaria, Samoa, Russia, United States, Iran, Haiti, East Timor, Seychelles, North Korea, China, Qatar. A well-built logistics bond and a partnership network guide us to dispatch our goods anywhere in the globe immediately without compromising product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Usage | Type | Material | Surface Treatment | Max. Operating Pressure | ||||||||||
Pitch (P) Standard | Pitch (P) Configurable | |||||||||||||
25x32 Sq. | 30x35 Sq. | 15 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | 25x32 Sq. | 30x35 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | ||||
Hydraulic | BMZS | BMZF | - | - | - | - | - | BMZFP | - | - | - | EN 1.0038 Equiv. | Trivalent Chromate | 20.6MPa≈210kgf/cm2 or less |
BMZSM | BMZFM | - | - | - | - | BMZSMP | BMZFMP | - | - | - | Electroless Nickel Plating | |||
BMZSR | BMZFR | - | - | - | - | BMZSRP | BMZFRP | - | - | - | EN 1.4301 Equiv. | - | ||
Pneumatic | - | - | BMZAS | BMZAFC | BMZAF | BMZAFL | - | - | BMZAFCP | BMZAFP | BMZAFLP | EN AW-5052 Equiv. | - | 1MPa≈10kgf/cm2 or less |
- | - | BMZASA | BMZAFCA | BMZAFA | BMZAFLA | - | - | BMZAFCAP | BMZAFAP | BMZAFLAP | Clear Anodize |
Part Number | - | Q | - | G | - | P | ||
BMZF4 BMZFP3 G-BMZFP3 | - - - | Q1 Q2 Q2 | - - - | G2 G2 G2 | - - | P30 P30 | (G Thread) |
Part Number | Rc (PT), M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of Q and G Threads | A | B | E | F | X | Y | Mounting Hole Dimension | |||||
Type | Number of Circuits | Q | G | Standard | Configurable 1mm Increment | d | D | h | ||||||||
Hydraulic (25x32 Sq.) | 1 | 1 (1/8) 2 (1/4) | 1 (1/8) 2 (1/4) | 25 | 20~50 Specify within NxP≤140. | 0 | 2 | 25 | 32 | 20 | 20 | 15 | 6 | 5.5 | 9.5 | 5.5 |
Pitch Standard BMZS BMZSM BMZSR | Pitch Configurable BMZSMP BMZSRP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 | ||||||||||||||
Hydraulic (30x35 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) | 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) | 35 | 25~50 Specify within NxP≤120. | 0 | 2 | 30 | 35 | 25 | 22 | 15 | 7 | 6.6 | 11 | 6.5 |
Pitch Standard BMZF BMZFM BMZFR | Pitch Configurable BMZFP BMZFMP BMZFRP | 2 | 1 | 3 | 20 | |||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 30 | 4 | 6 | |||||||||||||
Pneumatic (15 Sq.) | 1 | M3 (M3) M4 (M4) 5 (M5) | 5 (M5) | 15 | - | 0 | 2 | 15 | 15 | 15 | 10 | 5 | 3.5 | 4.3 | - | - |
Pitch Standard BMZAS BMZASA | 2 | 1 | 3 | |||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 | ||||||||||||||
Pneumatic (20 Sq.) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5)* | 1 (1/8) 5 (M5)* | 15 | 15~50 When 5 (M5) is selected for G, specify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. | 0 | 2 | 20 | 20 | 20 | 13 | 5 | 4 | 5.5 | - | - |
Pitch Standard BMZAFC BMZAFCA | Pitch Configurable BMZAFCP BMZAFCAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5* | 4 | 6 | ||||||||||||||
Pneumatic (30 Sq.) | 1 | 1 (1/8) 2 (1/4) 5 (M5)* | 1 (1/8) 2 (1/4) 5 (M5)* | 25 | 20~50 When 5 (M5) is selected for G, spwecify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. When 1(1/8) or 2 (1/4) is selected for G, specify within NxP≤130. | 0 | 2 | 30 | 30 | 20 | 20 | 7.5 | 7 | 5.5 | 9.5 | 5.5 |
Pitch Standard BMZAF BMZAFA | Pitch Configurable BMZAFP BMZAFAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5* | 4 | 6 | ||||||||||||||
Pneumatic (40 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) | 2 (1/4) 3 (3/8) 4 (1/2) | 30 | 25~50 specify within N+P≤130 | 0 | 2 | 40 | 40 | 25 | 25 | 7 | 7 | 6.6 | 11 | 6.5 |
Pitch Standard BMZAFL BMZAFLA | Pitch Configurable BMZAFLP BMZAFLAP | 2 | 1 | 3 | ||||||||||||
3 | 2 | 4 | ||||||||||||||
4 | 3 | 5 | ||||||||||||||
5 | 4 | 6 |