We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
TLSS25
Description
Brackets for Stands/Separate Tightening Casting/Square Flange
Stock availability:
On request
If you are inspecting MISUMI TLSS25, reach FAMAGA, the world's influential distributor of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and private attention to each consumer. We admire everyone, who joined with us - so, our regular buyers accept the most desirable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 3500 such purchasers, and we constantly form new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Papua New Guinea, Azerbaijan, Sri Lanka, Georgia, Dominica, Laos, Czech Republic, Mozambique, Senegal, Niger, Kazakhstan, Honduras, Turkey, Burma, Paraguay, Australia, Macedonia, Bolivia, Montenegro, Benin, Malaysia, Burundi, Saudi Arabia, Iraq, Antigua and Barbuda, Austria, Namibia, Mauritania, Samoa, Denmark, Madagascar, Morocco, Slovakia, Kenya, Panama, Andorra, Tonga, Malta, Angola, Sudan, Afghanistan, Sweden, Norway, Peru, India, Costa Rica, Iceland, Finland. A advanced logistics chains and a partnership network guide us to send our goods anywhere in the world quickly without discrediting product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as to stay on the top.
To ask a question or place an order, phone us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Accessory | |
Compact Flanged | Square Flanged | |||
TLSB | KLSB | EN 1.1191 Equiv. | Black Oxide | Hex Socket Head Cap Screw |
TLSM | KLSM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
TLSS | KLSS | EN 1.4301 Equiv. | - |
Part Number |
TLSB20 |
Part Number | A | B | L | T | D1 | F | G | b | C | S | H | Y | d | d1 | MA | h | f | e | W | K | P | |||
Type | DH7 | |||||||||||||||||||||||
(Compact Flanged) TLSB TLSM TLSS | (Square Flanged) KLSB KLSM KLSS | 10 | +0.015 0 | 45 | 28 | 35 | 10 | 26 | 30 | 18 | 4.5 | 29 | - | 9.5 | 3 | 4.5 | 8 | M4 | 22 | 15 | 14 | 2 | 35 | 36 |
12 | +0.018 0 | 50 | 32 | 30 | 34 | 22 | - | 10.5 | 3.5 | 16 | 38 | 40 | ||||||||||||
15 | 58 | 38 | 39 | 12 | 35 | 38 | 26 | 5.5 | 32 | - | 12.5 | 4 | 5.5 | 9.5 | M5 | 24 | 17 | 19 | 44 | 46 | ||||
20 | +0.021 0 | 64 | 42 | 50 | 12 | 40 | 42 | 30 | 6.6 | 33.8 | 10.5 | 14 | 6.5 | 5.5 | 9.5 | M5 | 27 | 25 | 24 | 2 | 50 | 52 | ||
25 | 80 | 50 | 60 | 48 | 54 | 35 | 9 | 41.5 | 12 | 17 | 8 | 6.6 | 11 | M6 | 34 | 28 | 29 | 62 | 64 | |||||
30 | 90 | 60 | 70 | 15 | 58 | 58 | 45 | 47 | 15 | 21 | 8 | 9 | 14 | M8 | 38 | 34 | 34 | 68 | 74 | |||||
35 | +0.025 0 | 100 | 66 | 80 | 15 | 64 | 66 | 48 | 11 | 55 | 16 | 23 | 11.5 | 9 | 14 | M8 | 44 | 39 | 41 | 3 | 76 | 82 | ||
40 | 106 | 72 | 90 | 70 | 70 | 54 | 64 | 17 | 26 | 53 | 40 | 46 | 80 | 88 | ||||||||||
50 | 125 | 88 | 110 | 18 | 85 | 80 | 68 | 14 | 77.5 | 21.0 | 32 | 12 | 11 | 17.5 | M10 | 65 | 48 | 58 | 94 | 105 | ||||
For the available sizes, refer to the price list. The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. |