We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
TLSB12
Description
Brackets for Stands/Separate Tightening Casting/Square Flange
Stock availability:
On request
If you are pursuing MISUMI TLSB12, make contact with FAMAGA, the world's dominant supplier of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each consumer. We praise everyone, who worked with us - thus, our regular consumers accept the most convenient purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Liberia, Bhutan, Kenya, Italy, Mauritania, Kuwait, Thailand, Mauritius, Afghanistan, Canada, Sweden, Costa Rica, Nicaragua, Morocco, Tajikistan, Pakistan, Lithuania, Syria, Czech Republic, India, United Arab Emirates, Turkmenistan, Switzerland, Suriname, Mozambique, Ghana, Guyana, Israel, Luxembourg, Uganda, Bosnia and Herzegovina, Latvia, Finland, Iceland, Estonia, Cape Verde, Djibouti, Tanzania, Georgia, Uruguay, Angola, Albania, Slovakia, Benin, Qatar, Guatemala, Hungary. A well-built logistics chains and a partnership network guide us to conduct our units anywhere in the planet as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To inquire or book, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Accessory | |
Compact Flanged | Square Flanged | |||
TLSB | KLSB | EN 1.1191 Equiv. | Black Oxide | Hex Socket Head Cap Screw |
TLSM | KLSM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
TLSS | KLSS | EN 1.4301 Equiv. | - |
Part Number |
TLSB20 |
Part Number | A | B | L | T | D1 | F | G | b | C | S | H | Y | d | d1 | MA | h | f | e | W | K | P | |||
Type | DH7 | |||||||||||||||||||||||
(Compact Flanged) TLSB TLSM TLSS | (Square Flanged) KLSB KLSM KLSS | 10 | +0.015 0 | 45 | 28 | 35 | 10 | 26 | 30 | 18 | 4.5 | 29 | - | 9.5 | 3 | 4.5 | 8 | M4 | 22 | 15 | 14 | 2 | 35 | 36 |
12 | +0.018 0 | 50 | 32 | 30 | 34 | 22 | - | 10.5 | 3.5 | 16 | 38 | 40 | ||||||||||||
15 | 58 | 38 | 39 | 12 | 35 | 38 | 26 | 5.5 | 32 | - | 12.5 | 4 | 5.5 | 9.5 | M5 | 24 | 17 | 19 | 44 | 46 | ||||
20 | +0.021 0 | 64 | 42 | 50 | 12 | 40 | 42 | 30 | 6.6 | 33.8 | 10.5 | 14 | 6.5 | 5.5 | 9.5 | M5 | 27 | 25 | 24 | 2 | 50 | 52 | ||
25 | 80 | 50 | 60 | 48 | 54 | 35 | 9 | 41.5 | 12 | 17 | 8 | 6.6 | 11 | M6 | 34 | 28 | 29 | 62 | 64 | |||||
30 | 90 | 60 | 70 | 15 | 58 | 58 | 45 | 47 | 15 | 21 | 8 | 9 | 14 | M8 | 38 | 34 | 34 | 68 | 74 | |||||
35 | +0.025 0 | 100 | 66 | 80 | 15 | 64 | 66 | 48 | 11 | 55 | 16 | 23 | 11.5 | 9 | 14 | M8 | 44 | 39 | 41 | 3 | 76 | 82 | ||
40 | 106 | 72 | 90 | 70 | 70 | 54 | 64 | 17 | 26 | 53 | 40 | 46 | 80 | 88 | ||||||||||
50 | 125 | 88 | 110 | 18 | 85 | 80 | 68 | 14 | 77.5 | 21.0 | 32 | 12 | 11 | 17.5 | M10 | 65 | 48 | 58 | 94 | 105 | ||||
For the available sizes, refer to the price list. The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. |