We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI SAQS20, make contact with FAMAGA, the world's main provider of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each consumer. We cherish everyone, who collaborated with us - so, our regular consumers bring in the most flexible purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4500 such consumers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Ukraine, Finland, Fiji, India, Pakistan, Ghana, Myanmar, El Salvador, Canada, Denmark, Jamaica, Sweden, East Timor, Jordan, Saudi Arabia, Bolivia, Romania, Grenada, United Arab Emirates, Syria, Sudan, Swaziland, Suriname, Russia, Benin, South Sudan, Brunei, Mauritania, Mali, Samoa, Botswana, Guatemala, Israel, Seychelles, Comoros, Poland, Argentina, Switzerland, New Zealand, China, Slovakia, Belarus, Luxembourg, Kuwait, Algeria. A well-built logistics bond and a partnership network assist us to dispatch our products anywhere in the world immediately without compromising product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been provided, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, phone us or write a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Accessory | |
Counterbored Hole | Tapped Hole | |||
SAQB | SBQB | General Structural Steel | Black Oxide | Hex Socket Head Cap Screw |
SAQM | SBQM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
SAQS | - | EN 1.4301 Equiv. | - |
Part Number |
SAQB20 SBQBK30 |
Part Number | A | B | C | F | f1 | f2 | f3 | G | b | b1 | h | m | H | MA | X | S | d | d1 | Z | W | Included Screw | |||
Type | DH7 | |||||||||||||||||||||||
Counterbored Hole SAQB SAQM SAQS | Tapped Hole SBQB SBQM | 10 | +0.015 0 | 40 | 20 | 19 | 28 | 9 | 19 | 6 | 11 | 5 | 8 | 4.6 | M4 | 9 | M4 | 4.75 | 9.5 | 5 | 8 | 4.6 | 2 | M4-15, 2 pcs. |
12 | +0.018 0 | 42 | 30 | 10 | 20 | 10 | ||||||||||||||||||
15 | 50 | 22 | 21 | 38 | 14 | 24 | 12 | 6 | 9.2 | 5.5 | M5 | 12 | M5 | 5.5 | 10 | 6 | 9.5 | 5.5 | M5-15, 2 pcs. | |||||
20 | +0.021 0 | 60 | 30 | 29 | 45 | 17.5 | 27.5 | 7.5 | 16 | 7 | 11 | 6.5 | M6 | 15 | M6 | 7 | 15 | 7 | 11 | 6.5 | M6-20, 2 pcs. | |||
25 | 65 | 35 | 34 | 50 | 20 | 30 | 20 | 17 | 20 | M6-25, 2 pcs. | ||||||||||||||
30 | 80 | 45 | 44 | 60 | 22.5 | 37.5 | 10 | 25 | 9 | 14 | 9 | M8 | 21 | M8 | 9.5 | 25 | 9 | 14 | 9 | M8-30, 2 pcs. | ||||
35 | +0.025 0 | 85 | 50 | 49 | 65 | 25 | 40 | 30 | 24 | 30 | 3 | M8-35, 2 pcs. | ||||||||||||
40 | 100 | 60 | 59 | 75 | 30 | 45 | 12.5 | 35 | 11 | 17.5 | 11 | M10 | 26 | 12 | 35 | M8-40, 2 pcs. | ||||||||
50 | 110 | 70 | 69 | 85 | 32.5 | 52.5 | 45 | 33 | M10 | 14.5 | 40 | 11 | 17.5 | 11 | M10-50, 2 pcs. | |||||||||
The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and 2144. Tightening with a long wrench is recommended. |