We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PETRF6-[8-50/0.5]
Description
Circular Posts/Both Ends Tapped With Standard Wrench Flat/Standard L Dimension
Stock availability:
On request
If you are seeking MISUMI PETRF6-[8-50/0.5], call FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of outputs and private attention to each consumer. We praise everyone, who engaged with us - hence, our regular consumers obtain the most convenient purchase forms and discounts on the factory-made equipment market. Today, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Switzerland, Spain, Mali, Paraguay, Comoros, Bhutan, Senegal, Myanmar, Slovenia, Israel, Afghanistan, Uzbekistan, Kiribati, Saudi Arabia, Liberia, Serbia, Belize, Argentina, Antigua and Barbuda, Azerbaijan, Vietnam, Macedonia, Zambia, Tonga, Australia, Chile, Peru, Brazil, Czech Republic, Yemen, Uganda, Iraq, Sierra Leone, East Timor, Lithuania, Sudan, Ukraine, Iceland, United Arab Emirates, Montenegro, Algeria. A well-developed logistics system and a partnership network help us to ship our goods anywhere in the planet as soon as possible without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is rising every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.
To request or book, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
L Dimension Selectable | L Dimension Configurable | |||||
Standard | Wrench Flats | Thread Dia. Configurable | Thread Dia. Configurable, Wrench Flats | |||
- | NETRF | NETRS | NETF | NETS | *EN 1.0038 Equiv. | - |
ETKR | ETKRF | ETKRS | ETKF | ETKS | Black Oxide | |
PETR | PETRF | PETRS | PETF | PETS | Electroless Nickel Plating | |
- | BETRF | BETRS | - | BETS | Trivalent Chromate (Black) | |
SETR | SETRF | SETRS | SETF | SETS | EN 1.4301 Equiv. | - |
- | AETRF | AETRS | AETTF | AETTS | EN AW-2017 Equiv. | Clear Anodize |
Part Number | - | L | - | SC | - | M | - | N |
ETKR10 ETKRF10 ETKF20 SETS25 | - - - - | 150 150 400 500 | - | SC100 | - - | M8 M10 | - - | N10 N12 |
Part Number | L Selection | M (Coarse) | S | W | 1 | |||||||||||||||||||
Type | D | |||||||||||||||||||||||
General Structural Steel ETKR PETR EN 1.4301 Equiv. SETR | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 3.5 | 5 | 8 | |||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 6 | 7 | ||||
10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 6 | 8 | |||
12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 7.5 | 10 | 10 | |||
15 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 10 | 13 | ||||||
20 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 15 | 17 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M (Coarse) | W | 1 | ||
Type | D | ||||||
L Dimension Configurable EN 1.0038 Equiv. NETRF ETKRF PETRF BETRF EN 1.4301 Equiv. SETRF EN AW-2017 Equiv. AETRF | L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETRS ETKRS PETRS BETRS EN 1.4301 Equiv. SETRS EN AW-2017 Equiv. AETRS | *1 5 | 8~50 | 0~42 | 2.6 | 4 | 8 |
6 | 8~50 | 0~42 | 3 | 5 | |||
8 | 10~150 | 0~142 | 4 | 7 | |||
10 | 15~350 | 0~342 | 5 | 8 | |||
12 | 25~400 | 0~390 | 6 | 10 | 10 | ||
15 | 25~500 | 0~490 | 8 | 13 | |||
20 | 30~500 | 0~490 | 10 | 17 | |||
25 | 40~600 | 0~590 | 12 | 22 | |||
30 | 50~700 | 0~685 | 16 | 27 | 15 | ||
*2 35 | 50~800 | 0~785 | 16 | 30 | |||
*2 40 | 60~900 | 0~880 | 20 | 36 | 20 | ||
*2 50 | 75~1000 | 0~980 | 24 | 41 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M / N (Coarse) Selection | W | 1 | ||||||||||||
Type | D | ||||||||||||||||
Thread Dia. Configurable EN 1.0038 Equiv. NETF ETKF PETF EN 1.4301 Equiv. SETF EN AW-2017 Equiv. AETTF | Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETS ETKS PETS BETS EN 1.4301 Equiv. SETS EN AW-2017 Equiv. AETTS | *1 5 | 15~50 | 0~42 | 2.6 | 3 | 4 | 8 | |||||||||
6 | 15~50 | 0~42 | 3 | 4 | 5 | ||||||||||||
8 | 15~150 | 0~142 | 3 | 4 | 5 | 7 | |||||||||||
10 | 20~350 | 0~342 | 4 | 5 | 6 | 8 | |||||||||||
12 | 25~400 | 0~390 | 5 | 6 | 8 | 10 | 10 | ||||||||||
15 | 30~500 | 0~490 | 6 | 8 | 10 | 13 | |||||||||||
20 | 40~500 | 0~490 | 6 | 8 | 10 | 12 | 17 | ||||||||||
25 | 50~600 | 0~590 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||
30 | 60~700 | 0~685 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | |||||||
*2 35 | 75~800 | 0~785 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | |||||||
*2 40 | 75~900 | 0~880 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | ||||||||
*2 50 | 75~1000 | 0~980 | 12 | 16 | 20 | 24 | 41 | 20 |