We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PETRF30-[50-700/0.5]
Description
Circular Posts/Both Ends Tapped With Standard Wrench Flat/Standard L Dimension
Stock availability:
On request
If you are seeking MISUMI PETRF30-[50-700/0.5], communicate with FAMAGA, the world's primary supplier of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and private attention to each orderer. We value everyone, who joined with us - so, our regular consumers pick up the most helpful purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Macedonia, San Marino, Sri Lanka, United States, Latvia, Kazakhstan, Eritrea, Kuwait, Colombia, Burma, Mozambique, Montenegro, Fiji, Estonia, Monaco, Guyana, Zambia, The Gambia, Guatemala, Philippines, El Salvador, Ukraine, Cape Verde, Pakistan, Panama, Sweden, South Korea, Lithuania, Mauritania, Mexico, Iran, Mauritius, Azerbaijan, Russia, Algeria, Botswana, Haiti, China, Albania, Kenya, Yemen, Tajikistan. A well-developed logistics series and a partnership network assist us to ship our units anywhere in the earth promptly without undermining product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
L Dimension Selectable | L Dimension Configurable | |||||
Standard | Wrench Flats | Thread Dia. Configurable | Thread Dia. Configurable, Wrench Flats | |||
- | NETRF | NETRS | NETF | NETS | *EN 1.0038 Equiv. | - |
ETKR | ETKRF | ETKRS | ETKF | ETKS | Black Oxide | |
PETR | PETRF | PETRS | PETF | PETS | Electroless Nickel Plating | |
- | BETRF | BETRS | - | BETS | Trivalent Chromate (Black) | |
SETR | SETRF | SETRS | SETF | SETS | EN 1.4301 Equiv. | - |
- | AETRF | AETRS | AETTF | AETTS | EN AW-2017 Equiv. | Clear Anodize |
Part Number | - | L | - | SC | - | M | - | N |
ETKR10 ETKRF10 ETKF20 SETS25 | - - - - | 150 150 400 500 | - | SC100 | - - | M8 M10 | - - | N10 N12 |
Part Number | L Selection | M (Coarse) | S | W | 1 | |||||||||||||||||||
Type | D | |||||||||||||||||||||||
General Structural Steel ETKR PETR EN 1.4301 Equiv. SETR | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 3.5 | 5 | 8 | |||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 6 | 7 | ||||
10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 6 | 8 | |||
12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 7.5 | 10 | 10 | |||
15 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 10 | 13 | ||||||
20 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 15 | 17 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M (Coarse) | W | 1 | ||
Type | D | ||||||
L Dimension Configurable EN 1.0038 Equiv. NETRF ETKRF PETRF BETRF EN 1.4301 Equiv. SETRF EN AW-2017 Equiv. AETRF | L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETRS ETKRS PETRS BETRS EN 1.4301 Equiv. SETRS EN AW-2017 Equiv. AETRS | *1 5 | 8~50 | 0~42 | 2.6 | 4 | 8 |
6 | 8~50 | 0~42 | 3 | 5 | |||
8 | 10~150 | 0~142 | 4 | 7 | |||
10 | 15~350 | 0~342 | 5 | 8 | |||
12 | 25~400 | 0~390 | 6 | 10 | 10 | ||
15 | 25~500 | 0~490 | 8 | 13 | |||
20 | 30~500 | 0~490 | 10 | 17 | |||
25 | 40~600 | 0~590 | 12 | 22 | |||
30 | 50~700 | 0~685 | 16 | 27 | 15 | ||
*2 35 | 50~800 | 0~785 | 16 | 30 | |||
*2 40 | 60~900 | 0~880 | 20 | 36 | 20 | ||
*2 50 | 75~1000 | 0~980 | 24 | 41 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M / N (Coarse) Selection | W | 1 | ||||||||||||
Type | D | ||||||||||||||||
Thread Dia. Configurable EN 1.0038 Equiv. NETF ETKF PETF EN 1.4301 Equiv. SETF EN AW-2017 Equiv. AETTF | Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETS ETKS PETS BETS EN 1.4301 Equiv. SETS EN AW-2017 Equiv. AETTS | *1 5 | 15~50 | 0~42 | 2.6 | 3 | 4 | 8 | |||||||||
6 | 15~50 | 0~42 | 3 | 4 | 5 | ||||||||||||
8 | 15~150 | 0~142 | 3 | 4 | 5 | 7 | |||||||||||
10 | 20~350 | 0~342 | 4 | 5 | 6 | 8 | |||||||||||
12 | 25~400 | 0~390 | 5 | 6 | 8 | 10 | 10 | ||||||||||
15 | 30~500 | 0~490 | 6 | 8 | 10 | 13 | |||||||||||
20 | 40~500 | 0~490 | 6 | 8 | 10 | 12 | 17 | ||||||||||
25 | 50~600 | 0~590 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||
30 | 60~700 | 0~685 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | |||||||
*2 35 | 75~800 | 0~785 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | |||||||
*2 40 | 75~900 | 0~880 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | ||||||||
*2 50 | 75~1000 | 0~980 | 12 | 16 | 20 | 24 | 41 | 20 |