We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PETR15-[35-50/5]
Description
Circular Posts/Both Ends Tapped With Standard Wrench Flat/Standard L Dimension
Stock availability:
On request
If you are questing MISUMI PETR15-[35-50/5], reach FAMAGA, the world's primary supplier of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and individual attention to each customer. We value everyone, who conspired with us - so, our regular purchasers receive the most attractive purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Laos, Papua New Guinea, Colombia, South Korea, Nepal, Iran, Congo, Fiji, East Timor, Netherlands, Liberia, Indonesia, New Zealand, Pakistan, El Salvador, Brazil, Cyprus, Mozambique, Vietnam, Malaysia, Mongolia, Samoa, Mauritania, China, Zimbabwe, Latvia, Niger, Comoros, Swaziland, Sudan, Russia, Cameroon, Croatia, The Gambia, Belarus, Jamaica, Finland, Ireland, Iceland, Dominica, Andorra. A advanced logistics bond and a partnership network guide us to conduct our goods anywhere in the world immediately without disreputing product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To request or order, get in touch with us or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
L Dimension Selectable | L Dimension Configurable | |||||
Standard | Wrench Flats | Thread Dia. Configurable | Thread Dia. Configurable, Wrench Flats | |||
- | NETRF | NETRS | NETF | NETS | *EN 1.0038 Equiv. | - |
ETKR | ETKRF | ETKRS | ETKF | ETKS | Black Oxide | |
PETR | PETRF | PETRS | PETF | PETS | Electroless Nickel Plating | |
- | BETRF | BETRS | - | BETS | Trivalent Chromate (Black) | |
SETR | SETRF | SETRS | SETF | SETS | EN 1.4301 Equiv. | - |
- | AETRF | AETRS | AETTF | AETTS | EN AW-2017 Equiv. | Clear Anodize |
Part Number | - | L | - | SC | - | M | - | N |
ETKR10 ETKRF10 ETKF20 SETS25 | - - - - | 150 150 400 500 | - | SC100 | - - | M8 M10 | - - | N10 N12 |
Part Number | L Selection | M (Coarse) | S | W | 1 | |||||||||||||||||||
Type | D | |||||||||||||||||||||||
General Structural Steel ETKR PETR EN 1.4301 Equiv. SETR | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 3.5 | 5 | 8 | |||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 6 | 7 | ||||
10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 6 | 8 | |||
12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 7.5 | 10 | 10 | |||
15 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 10 | 13 | ||||||
20 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 15 | 17 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M (Coarse) | W | 1 | ||
Type | D | ||||||
L Dimension Configurable EN 1.0038 Equiv. NETRF ETKRF PETRF BETRF EN 1.4301 Equiv. SETRF EN AW-2017 Equiv. AETRF | L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETRS ETKRS PETRS BETRS EN 1.4301 Equiv. SETRS EN AW-2017 Equiv. AETRS | *1 5 | 8~50 | 0~42 | 2.6 | 4 | 8 |
6 | 8~50 | 0~42 | 3 | 5 | |||
8 | 10~150 | 0~142 | 4 | 7 | |||
10 | 15~350 | 0~342 | 5 | 8 | |||
12 | 25~400 | 0~390 | 6 | 10 | 10 | ||
15 | 25~500 | 0~490 | 8 | 13 | |||
20 | 30~500 | 0~490 | 10 | 17 | |||
25 | 40~600 | 0~590 | 12 | 22 | |||
30 | 50~700 | 0~685 | 16 | 27 | 15 | ||
*2 35 | 50~800 | 0~785 | 16 | 30 | |||
*2 40 | 60~900 | 0~880 | 20 | 36 | 20 | ||
*2 50 | 75~1000 | 0~980 | 24 | 41 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M / N (Coarse) Selection | W | 1 | ||||||||||||
Type | D | ||||||||||||||||
Thread Dia. Configurable EN 1.0038 Equiv. NETF ETKF PETF EN 1.4301 Equiv. SETF EN AW-2017 Equiv. AETTF | Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETS ETKS PETS BETS EN 1.4301 Equiv. SETS EN AW-2017 Equiv. AETTS | *1 5 | 15~50 | 0~42 | 2.6 | 3 | 4 | 8 | |||||||||
6 | 15~50 | 0~42 | 3 | 4 | 5 | ||||||||||||
8 | 15~150 | 0~142 | 3 | 4 | 5 | 7 | |||||||||||
10 | 20~350 | 0~342 | 4 | 5 | 6 | 8 | |||||||||||
12 | 25~400 | 0~390 | 5 | 6 | 8 | 10 | 10 | ||||||||||
15 | 30~500 | 0~490 | 6 | 8 | 10 | 13 | |||||||||||
20 | 40~500 | 0~490 | 6 | 8 | 10 | 12 | 17 | ||||||||||
25 | 50~600 | 0~590 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||
30 | 60~700 | 0~685 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | |||||||
*2 35 | 75~800 | 0~785 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | |||||||
*2 40 | 75~900 | 0~880 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | ||||||||
*2 50 | 75~1000 | 0~980 | 12 | 16 | 20 | 24 | 41 | 20 |