We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
NETGRF50-[80-1000/0.5]
Description
Circular Posts/One End Threaded/One End Tapped/Standard Wrench Flat
Stock availability:
On request
If you are inspecting MISUMI NETGRF50-[80-1000/0.5], communicate with FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and particular attention to each consumer. We understand everyone, who engaged with us - so, our regular purchasers obtain the most attractive purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4000 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Kenya, Mozambique, Mali, Dominican Republic, Poland, Saudi Arabia, Slovenia, Bolivia, Australia, Indonesia, Azerbaijan, Romania, Cape Verde, Georgia, Zambia, Russia, Kuwait, Eritrea, Yemen, The Gambia, Costa Rica, Grenada, China, Gambia, Netherlands, Estonia, Moldova, Sweden, Armenia, Guyana, Iran, Swaziland, Sudan, Angola, Norway, Albania, Guatemala, Burkina Faso, Chile, Samoa, Qatar, Jamaica, Switzerland, North Korea, Latvia, Zimbabwe. A well-elaborated logistics link and a partnership network assist us to dispatch our goods anywhere in the globe on-time without compromising product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
L Dimension Selectable | L Dimension Configurable | |||||
Standard | Wrench Flats | Thread Dia. Configurable | Thread Dia. Configurable, Wrench Flats | |||
- | NETGRF | NETGRS | NETG | NETGS | *EN 1.0038 Equiv. | - |
ETKGR | ETKGRF | ETKGRS | ETKG | ETKGS | Black Oxide | |
PETGR | PETGRF | PETGRS | PETG | PETGS | Electroless Nickel Plating | |
- | BETGRF | BETGRS | BETG | BETGS | Trivalent Chromate (Black) | |
SETGR | SETGRF | SETGRS | SETG | SETGS | EN 1.4301 Equiv. | - |
Part Number | - | L | - | SC | - | M | - | N |
ETKGR10 ETKGRF6 ETKG12 ETKGS20 | - - - - | 150 32 250 400 | - | SC100 | - - | M6 M8 | - - | N8 N10 |
Part Number | L Selection | M (Coarse) | S | W | 1 | |||||||||||||||||||
Type | D | |||||||||||||||||||||||
General Structural Steel ETKGR PETGR EN 1.4301 Equiv. SETGR | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 3.5 | 5 | 8 | |||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 6 | 7 | ||||
10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 6 | 8 | |||
12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 7.5 | 10 | 10 | |||
15 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 10 | 13 | |||||
20 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 15 | 17 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M (Coarse) | W | 1 | ||
Type | D | ||||||
L Dimension Configurable EN 1.0038 Equiv. NETGRF ETKGRF PETGRF BETGRF EN 1.4301 Equiv. SETGRF | L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETGRS ETKGRS PETGRS BETGRS EN 1.4301 Equiv. SETGRS | 5 | 15~50 | 0~42 | 2.6 | 4 | 8 |
6 | 15~50 | 0~42 | 3 | 5 | |||
8 | 20~150 | 0~142 | 4 | 7 | |||
10 | 20~350 | 0~342 | 5 | 8 | |||
12 | 25~400 | 0~390 | 6 | 10 | 10 | ||
15 | 30~500 | 0~490 | 8 | 13 | |||
20 | 35~500 | 0~490 | 10 | 17 | |||
25 | 45~600 | 0~590 | 12 | 22 | |||
30 | 55~700 | 0~685 | 16 | 27 | 15 | ||
*35 | 55~800 | 0~785 | 16 | 30 | 15 | ||
*40 | 65~900 | 0~880 | 20 | 36 | 20 | ||
*50 | 80~1000 | 0~980 | 24 | 41 | 20 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M / N (Coarse) Selection | W | 1 | ||||||||||||
Type | D | ||||||||||||||||
Thread Dia. Configurable EN 1.0038 Equiv. NETG ETKG PETG BETG EN 1.4301 Equiv. SETG | Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETGS ETKGS PETGS BETGS EN 1.4301 Equiv. SETGS | 5 | 15~50 | 0~42 | 2.6 | 3 | 4 | 8 | |||||||||
6 | 15~50 | 0~42 | 3 | 4 | 5 | ||||||||||||
8 | 20~150 | 0~142 | 3 | 4 | 5 | 7 | |||||||||||
10 | 20~350 | 0~342 | 4 | 5 | 6 | 8 | |||||||||||
12 | 25~400 | 0~390 | 5 | 6 | 8 | 10 | 10 | ||||||||||
15 | 30~500 | 0~490 | 6 | 8 | 10 | 13 | |||||||||||
20 | 40~500 | 0~490 | 6 | 8 | 10 | 12 | 17 | ||||||||||
25 | 55~600 | 0~590 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||
30 | 65~700 | 0~685 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | |||||||
*35 | 80~800 | 0~785 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | |||||||
*40 | 80~900 | 0~880 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | ||||||||
*50 | 80~1000 | 0~980 | 12 | 16 | 20 | 24 | 41 | 20 |