We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
NETGRF12-[25-400/0.5]
Description
Circular Posts/One End Threaded/One End Tapped/Standard Wrench Flat
Stock availability:
On request
If you are seeking MISUMI NETGRF12-[25-400/0.5], communicate with FAMAGA, the world's chief provider of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of products and private attention to each client. We value everyone, who liased with us - so, our regular buyers get the most favorable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such clients, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, India, Afghanistan, Brazil, Slovenia, Mexico, Uzbekistan, Cape Verde, Uganda, Kuwait, Jordan, Monaco, Peru, Malaysia, Namibia, Georgia, Sweden, The Bahamas, Morocco, Croatia, Oman, Liberia, Serbia, Azerbaijan, Guyana, Albania, Chile, Mauritius, Laos, Russia, Central African Republic, Suriname, Sierra Leone, Philippines, Kiribati, Botswana, Burkina Faso, Seychelles, Kyrgyzstan, United States, Vietnam, Qatar, China, Eswatini, Yemen, Cameroon. A well-elaborated logistics bond and a partnership network guide us to conduct our goods anywhere in the planet with no delay without damaging product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, contact us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
L Dimension Selectable | L Dimension Configurable | |||||
Standard | Wrench Flats | Thread Dia. Configurable | Thread Dia. Configurable, Wrench Flats | |||
- | NETGRF | NETGRS | NETG | NETGS | *EN 1.0038 Equiv. | - |
ETKGR | ETKGRF | ETKGRS | ETKG | ETKGS | Black Oxide | |
PETGR | PETGRF | PETGRS | PETG | PETGS | Electroless Nickel Plating | |
- | BETGRF | BETGRS | BETG | BETGS | Trivalent Chromate (Black) | |
SETGR | SETGRF | SETGRS | SETG | SETGS | EN 1.4301 Equiv. | - |
Part Number | - | L | - | SC | - | M | - | N |
ETKGR10 ETKGRF6 ETKG12 ETKGS20 | - - - - | 150 32 250 400 | - | SC100 | - - | M6 M8 | - - | N8 N10 |
Part Number | L Selection | M (Coarse) | S | W | 1 | |||||||||||||||||||
Type | D | |||||||||||||||||||||||
General Structural Steel ETKGR PETGR EN 1.4301 Equiv. SETGR | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 3.5 | 5 | 8 | |||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 6 | 7 | ||||
10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 6 | 8 | |||
12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 7.5 | 10 | 10 | |||
15 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 10 | 13 | |||||
20 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 15 | 17 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M (Coarse) | W | 1 | ||
Type | D | ||||||
L Dimension Configurable EN 1.0038 Equiv. NETGRF ETKGRF PETGRF BETGRF EN 1.4301 Equiv. SETGRF | L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETGRS ETKGRS PETGRS BETGRS EN 1.4301 Equiv. SETGRS | 5 | 15~50 | 0~42 | 2.6 | 4 | 8 |
6 | 15~50 | 0~42 | 3 | 5 | |||
8 | 20~150 | 0~142 | 4 | 7 | |||
10 | 20~350 | 0~342 | 5 | 8 | |||
12 | 25~400 | 0~390 | 6 | 10 | 10 | ||
15 | 30~500 | 0~490 | 8 | 13 | |||
20 | 35~500 | 0~490 | 10 | 17 | |||
25 | 45~600 | 0~590 | 12 | 22 | |||
30 | 55~700 | 0~685 | 16 | 27 | 15 | ||
*35 | 55~800 | 0~785 | 16 | 30 | 15 | ||
*40 | 65~900 | 0~880 | 20 | 36 | 20 | ||
*50 | 80~1000 | 0~980 | 24 | 41 | 20 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M / N (Coarse) Selection | W | 1 | ||||||||||||
Type | D | ||||||||||||||||
Thread Dia. Configurable EN 1.0038 Equiv. NETG ETKG PETG BETG EN 1.4301 Equiv. SETG | Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETGS ETKGS PETGS BETGS EN 1.4301 Equiv. SETGS | 5 | 15~50 | 0~42 | 2.6 | 3 | 4 | 8 | |||||||||
6 | 15~50 | 0~42 | 3 | 4 | 5 | ||||||||||||
8 | 20~150 | 0~142 | 3 | 4 | 5 | 7 | |||||||||||
10 | 20~350 | 0~342 | 4 | 5 | 6 | 8 | |||||||||||
12 | 25~400 | 0~390 | 5 | 6 | 8 | 10 | 10 | ||||||||||
15 | 30~500 | 0~490 | 6 | 8 | 10 | 13 | |||||||||||
20 | 40~500 | 0~490 | 6 | 8 | 10 | 12 | 17 | ||||||||||
25 | 55~600 | 0~590 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||
30 | 65~700 | 0~685 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | |||||||
*35 | 80~800 | 0~785 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | |||||||
*40 | 80~900 | 0~880 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | ||||||||
*50 | 80~1000 | 0~980 | 12 | 16 | 20 | 24 | 41 | 20 |