We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MCCTA12-[50-300/1]
Description
Brackets for Stands- Side Mounting Compact
Stock availability:
On request
If you are looking for MISUMI MCCTA12-[50-300/1], communicate with FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of products and personalseparate attention to each buyer. We esteem everyone, who liased with us - therefore, our regular consumers get the most attractive purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4500 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Peru, Tanzania, Equatorial Guinea, Serbia, Burkina Faso, Belgium, Bolivia, Panama, Liechtenstein, Romania, Mali, Georgia, Nepal, South Sudan, Suriname, Mauritius, Switzerland, Guyana, Jordan, Andorra, Malaysia, Afghanistan, Seychelles, Australia, Austria, Croatia, Angola, Antigua and Barbuda, Cyprus, Guatemala, Syria, Belize, Philippines, Tajikistan, Indonesia, Estonia, Latvia, Sweden, Turkey, Samoa, Ghana. A advanced logistics chains and a partnership network cheer us to conduct our products anywhere in the planet promptly without compromising product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Post | Bracket | Accessory | ||||
Solid | Hollow | MaterialHardness | Surface Treatment | Material | Surface Treatment | Solid | Hollow |
CCTN | CCTA | EN 1.1191 Equiv. Induction Hardened | - | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw | Set Screw Cap (P.2143) |
MCCTN | MCCTA | EN 1.1191 Equiv. | Electroless Nickel Plating | ||||
MCCTNM | MCCTAM | EN 1.1191 Equiv. | Electroless Nickel Plating | EN-JL 1040 Equiv. | Electroless Nickel Plating |
Type | Material | Surface Treatment | Accessory |
CCTF | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw |
CCTFM | Electroless Nickel Plating |
Part Number | - | L |
CCTN20 CCTFM35 | - | 350 |
Part Number | L 1mm Increment | A | B | F | G | E | (H) | T | h | K(d1) | (R) | M | (d) | ||||
Type | Dg6 | ||||||||||||||||
Set | Bracket only | 10 | -0.005 -0.014 | 50~250 | 45 | 30 | 33 | 15 | 23 | 26 | 9 | 18 | 13 | M5 (4.3) | 13 | M4 | 6.0 |
12 | -0.006 -0.017 | 50~300 | 48 | 33 | 35 | 18 | 25 | 28 | 14 | 14 | |||||||
(Solid) CCTN MCCTN MCCTNM | (Hollow) CCTA MCCTA MCCTAM | CCTF CCTFM | 15 | 75~350 | 55 | 35 | 40 | 20 | 28 | 31.5 | 20 | 16 | M6 (5.2) | 15.5 | M5 | 10.0 | |
20 | -0.007 -0.020 | 75~400 | 65 | 40 | 50 | 22 | 36 | 40 | 9 | 25 | 20 | 20 | M5 | 11.7 | |||
25 | 75~450 | 80 | 48 | 60 | 25 | 44 | 49.5 | 30 | 25 | M8 (6.8) | 24.5 | M6 | 15.2 | ||||
30 | 100~450 | 85 | 65 | 49 | 55 | 28 | 27 | 16.0 | |||||||||
35 | -0.009 -0.025 | 125~500 | 105 | 60 | 80 | 30 | 59 | 65.5 | 12 | 40 | 33 | M10 (8.6) | 32.5 | M8 | 20.1 | ||
40 | 150~500 | 110 | 85 | 64 | 71 | 36 | 35 | 22.7 | |||||||||
50 | 200~600 | 120 | 70 | 95 | 40 | 74 | 81 | 50 | 41 | 40 | M10 | 30.8 |