We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ETKR15-200
Description
Circular Posts/Both Ends Tapped With Standard Wrench Flat/Standard L Dimension
Stock availability:
On request
If you are looking for MISUMI ETKR15-200, make contact with FAMAGA, the world's principle retailer of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of items and private attention to each customer. We understand everyone, who joined with us - thus, our regular consumers pick up the most favorable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such customers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Indonesia, Estonia, Yemen, Antigua and Barbuda, Monaco, Tajikistan, Cameroon, Guatemala, Slovenia, Papua New Guinea, Laos, Haiti, Dominica, Nigeria, Russia, Guinea, Ireland, Lithuania, Mauritius, Zimbabwe, Tanzania, Vietnam, Samoa, Croatia, Liechtenstein, Guyana, El Salvador, Panama, Zambia, Seychelles, Philippines, Cape Verde, Brazil, Botswana, Syria, Serbia, Burkina Faso, Chile, Togo, Kyrgyzstan. A well-built logistics network and a partnership network let us to deliver our goods anywhere in the globe as soon as possible without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To consult or order, contact us or write to the online chat on our site. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
L Dimension Selectable | L Dimension Configurable | |||||
Standard | Wrench Flats | Thread Dia. Configurable | Thread Dia. Configurable, Wrench Flats | |||
- | NETRF | NETRS | NETF | NETS | *EN 1.0038 Equiv. | - |
ETKR | ETKRF | ETKRS | ETKF | ETKS | Black Oxide | |
PETR | PETRF | PETRS | PETF | PETS | Electroless Nickel Plating | |
- | BETRF | BETRS | - | BETS | Trivalent Chromate (Black) | |
SETR | SETRF | SETRS | SETF | SETS | EN 1.4301 Equiv. | - |
- | AETRF | AETRS | AETTF | AETTS | EN AW-2017 Equiv. | Clear Anodize |
Part Number | - | L | - | SC | - | M | - | N |
ETKR10 ETKRF10 ETKF20 SETS25 | - - - - | 150 150 400 500 | - | SC100 | - - | M8 M10 | - - | N10 N12 |
Part Number | L Selection | M (Coarse) | S | W | ?1 | |||||||||||||||||||
Type | D | |||||||||||||||||||||||
General Structural Steel ETKR PETR EN 1.4301 Equiv. SETR | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 3.5 | 5 | 8 | |||||||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 6 | 7 | ||||
10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 6 | 8 | |||
12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 7.5 | 10 | 10 | |||
15 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 10 | 13 | ||||||
20 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 15 | 17 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M (Coarse) | W | ?1 | ||
Type | D | ||||||
L Dimension Configurable EN 1.0038 Equiv. NETRF ETKRF PETRF BETRF EN 1.4301 Equiv. SETRF EN AW-2017 Equiv. AETRF | L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETRS ETKRS PETRS BETRS EN 1.4301 Equiv. SETRS EN AW-2017 Equiv. AETRS | *1 5 | 8~50 | 0~42 | 2.6 | 4 | 8 |
6 | 8~50 | 0~42 | 3 | 5 | |||
8 | 10~150 | 0~142 | 4 | 7 | |||
10 | 15~350 | 0~342 | 5 | 8 | |||
12 | 25~400 | 0~390 | 6 | 10 | 10 | ||
15 | 25~500 | 0~490 | 8 | 13 | |||
20 | 30~500 | 0~490 | 10 | 17 | |||
25 | 40~600 | 0~590 | 12 | 22 | |||
30 | 50~700 | 0~685 | 16 | 27 | 15 | ||
*2 35 | 50~800 | 0~785 | 16 | 30 | |||
*2 40 | 60~900 | 0~880 | 20 | 36 | 20 | ||
*2 50 | 75~1000 | 0~980 | 24 | 41 |
Part Number | L 0.5mm Increment | SC 1 mm Increment With Wrench Flats Only | M / N (Coarse) Selection | W | ?1 | ||||||||||||
Type | D | ||||||||||||||||
Thread Dia. Configurable EN 1.0038 Equiv. NETF ETKF PETF EN 1.4301 Equiv. SETF EN AW-2017 Equiv. AETTF | Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETS ETKS PETS BETS EN 1.4301 Equiv. SETS EN AW-2017 Equiv. AETTS | *1 5 | 15~50 | 0~42 | 2.6 | 3 | 4 | 8 | |||||||||
6 | 15~50 | 0~42 | 3 | 4 | 5 | ||||||||||||
8 | 15~150 | 0~142 | 3 | 4 | 5 | 7 | |||||||||||
10 | 20~350 | 0~342 | 4 | 5 | 6 | 8 | |||||||||||
12 | 25~400 | 0~390 | 5 | 6 | 8 | 10 | 10 | ||||||||||
15 | 30~500 | 0~490 | 6 | 8 | 10 | 13 | |||||||||||
20 | 40~500 | 0~490 | 6 | 8 | 10 | 12 | 17 | ||||||||||
25 | 50~600 | 0~590 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||
30 | 60~700 | 0~685 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | |||||||
*2 35 | 75~800 | 0~785 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | |||||||
*2 40 | 75~900 | 0~880 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | ||||||||
*2 50 | 75~1000 | 0~980 | 12 | 16 | 20 | 24 | 41 | 20 |