We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI CSTFM50, catch up with FAMAGA, the world's dominant producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of outputs and special attention to each consumer. We praise everyone, who cooperated with us - hence, our regular customers obtain the most helpful purchase terms and discounts on the industrial equipment market. At present, there are more than 4000 such customers, and we constantly compose new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Slovakia, Tajikistan, Central African Republic, Romania, Denmark, Japan, Iran, Antigua and Barbuda, Afghanistan, Russia, Guyana, Argentina, Albania, Rwanda, Georgia, Egypt, Switzerland, Peru, Equatorial Guinea, Sweden, Vietnam, Gambia, Nicaragua, Madagascar, Iraq, Cape Verde, Algeria, Comoros, Guatemala, Ireland, Israel, Brunei, Zimbabwe, Panama, Botswana, Latvia, Sudan, The Gambia, North Korea, Jamaica, Bangladesh, Belarus, Angola, Djibouti, Macedonia, Costa Rica, Mongolia. A well-developed logistics network and a partnership network let us to send our units anywhere in the earth as soon as possible without damaging product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as stay in control.
To request or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | Post | Bracket | Accessory | |||||
Round Flanged | Round Flanged, Dowel Holes | |||||||
Solid | Hollow | Solid | Material Hardness | Surface Treatment | Material | Surface Treatment | Solid | Hollow |
CSTN | CSTA | CSPN | EN 1.1191 Equiv. Induction Hardened | - | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw Hex Socket Head Screw | Set Screw Hex Socket Head Screw Cap (P.2143) |
MCSTN | MCSTA | MCSPN | EN 1.1191 Equiv. | Electroless Nickel Plating | ||||
SCSTN | SCSTA | SCSPN | EN 1.4301 Equiv. | - | ||||
CSTNM | CSTAM | - | EN 1.1191 Equiv. Induction Hardened | Electroless Nickel Plating | EN-JL 1040 Equiv. | Electroless Nickel Plating | ||
MCSTNM | MCSTAM | EN 1.1191 Equiv. | ||||||
SCSTNM | SCSTAM | EN 1.4301 Equiv. | - |
Type | Material | Surface Treatment | Accessory | ||
No Dowel Hole | With Dowel Holes | No Dowel Hole | With Dowel Holes | ||
CSTF | CSPF | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw | Set Screw Dowel Pin (EN 1.3505 Equiv.) |
CSTFM | - | Electroless Nickel Plating |
Part Number | - | L |
MCSPN50 CSTF20 | - | 500 |
Part Number | L 1mm Increment | A | D1 | H | T | ? | P.C.D. | K | J | M | (d) | Bracket with Dowel Holes | Included Hex Socket Head Cap Screw | ||||
Type | Dg6 | PH7 | Included Dowel Pin (2 pcs.) Tolerance m6 | ||||||||||||||
Tolerance | |||||||||||||||||
Set | 10 | -0.005 -0.014 | 50~250 | 56 | 26 | 35 | 12 | 18 | 43 | 4.5 | 11 | M4 | 6.0 | 6 | +0.012 0 | MSTM6-20 | M4-20x4 pcs. |
12 | -0.006 -0.017 | 50~300 | 68 | 28 | 51 | 5.5 | 13 | M5-20x4 pcs. | |||||||||
(Solid) CSTN MCSTN SCSTN CSTNM MCSTNM SCSTNM (Rods with Dowel Holes) CSPN MCSPN SCSPN Bracket only CSTF CSTFM | (Hollow) CSTA MCSTA SCSTA CSTAM MCSTAM SCSTAM Bracket only with Dowel Holes CSPF | ||||||||||||||||
15 | 75~350 | 75 | 31 | 40 | 20 | 56 | 6.6 | 15 | M5 | 10.0 | M6-25x4 pcs. | ||||||
20 | -0.007 -0.020 | 75~400 | 86 | 40 | 45 | 12 | 25 | 65 | 6.6 | 15 | M5 | 11.7 | 6 | +0.012 0 | MSTM6-20 | M6-25x4 pcs. | |
25 | 75~450 | 100 | 45 | 50 | 30 | 75 | 9 | 18 | M6 | 15.2 | 8 | +0.015 0 | MSTM8-20 | M8-25x4 pcs. | |||
30 | 100~450 | 106 | 50 | 60 | 80 | 16.0 | |||||||||||
35 | -0.009 -0.025 | 125~500 | 118 | 55 | 70 | 15? | 40 | 90 | 11 | 20 | M8 | 20.1 | 10 | +0.015 0 | MSTM10-30 | M10-35x4 pcs. | |
40 | 150~500 | 125 | 60 | 80 | 95 | 22.7 | |||||||||||
50 | 200~600 | 140 | 70 | 100 | 50 | 106 | 14 | 24 | M10 | 30.8 | M12-35x4 pcs. |