We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI CSTF40, connect FAMAGA, the world's prime distributor of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of products and individual attention to each buyer. We appreciate everyone, who conspired with us - therefore, our regular buyers receive the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such customers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Italy, Kazakhstan, Papua New Guinea, San Marino, Nigeria, Iraq, Norway, Suriname, Cyprus, Philippines, Czech Republic, Mauritania, Senegal, Switzerland, Afghanistan, Albania, Egypt, Japan, Grenada, Peru, Croatia, Nicaragua, Dominica, Benin, Russia, Nepal, Mexico, Comoros, Bulgaria, East Timor, Tunisia, Luxembourg, Poland, Sweden, The Gambia, Vietnam, Kiribati, Bolivia, Georgia, Madagascar, United Arab Emirates, Pakistan, Greece, Qatar, Niger. A advanced logistics chains and a partnership network let us to deliver our goods anywhere in the world immediately without discrediting product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or send a message to the online chat on our site. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | Post | Bracket | Accessory | |||||
Round Flanged | Round Flanged, Dowel Holes | |||||||
Solid | Hollow | Solid | Material Hardness | Surface Treatment | Material | Surface Treatment | Solid | Hollow |
CSTN | CSTA | CSPN | EN 1.1191 Equiv. Induction Hardened | - | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw Hex Socket Head Screw | Set Screw Hex Socket Head Screw Cap (P.2143) |
MCSTN | MCSTA | MCSPN | EN 1.1191 Equiv. | Electroless Nickel Plating | ||||
SCSTN | SCSTA | SCSPN | EN 1.4301 Equiv. | - | ||||
CSTNM | CSTAM | - | EN 1.1191 Equiv. Induction Hardened | Electroless Nickel Plating | EN-JL 1040 Equiv. | Electroless Nickel Plating | ||
MCSTNM | MCSTAM | EN 1.1191 Equiv. | ||||||
SCSTNM | SCSTAM | EN 1.4301 Equiv. | - |
Type | Material | Surface Treatment | Accessory | ||
No Dowel Hole | With Dowel Holes | No Dowel Hole | With Dowel Holes | ||
CSTF | CSPF | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw | Set Screw Dowel Pin (EN 1.3505 Equiv.) |
CSTFM | - | Electroless Nickel Plating |
Part Number | - | L |
MCSPN50 CSTF20 | - | 500 |
Part Number | L 1mm Increment | A | D1 | H | T | ? | P.C.D. | K | J | M | (d) | Bracket with Dowel Holes | Included Hex Socket Head Cap Screw | ||||
Type | Dg6 | PH7 | Included Dowel Pin (2 pcs.) Tolerance m6 | ||||||||||||||
Tolerance | |||||||||||||||||
Set | 10 | -0.005 -0.014 | 50~250 | 56 | 26 | 35 | 12 | 18 | 43 | 4.5 | 11 | M4 | 6.0 | 6 | +0.012 0 | MSTM6-20 | M4-20x4 pcs. |
12 | -0.006 -0.017 | 50~300 | 68 | 28 | 51 | 5.5 | 13 | M5-20x4 pcs. | |||||||||
(Solid) CSTN MCSTN SCSTN CSTNM MCSTNM SCSTNM (Rods with Dowel Holes) CSPN MCSPN SCSPN Bracket only CSTF CSTFM | (Hollow) CSTA MCSTA SCSTA CSTAM MCSTAM SCSTAM Bracket only with Dowel Holes CSPF | ||||||||||||||||
15 | 75~350 | 75 | 31 | 40 | 20 | 56 | 6.6 | 15 | M5 | 10.0 | M6-25x4 pcs. | ||||||
20 | -0.007 -0.020 | 75~400 | 86 | 40 | 45 | 12 | 25 | 65 | 6.6 | 15 | M5 | 11.7 | 6 | +0.012 0 | MSTM6-20 | M6-25x4 pcs. | |
25 | 75~450 | 100 | 45 | 50 | 30 | 75 | 9 | 18 | M6 | 15.2 | 8 | +0.015 0 | MSTM8-20 | M8-25x4 pcs. | |||
30 | 100~450 | 106 | 50 | 60 | 80 | 16.0 | |||||||||||
35 | -0.009 -0.025 | 125~500 | 118 | 55 | 70 | 15? | 40 | 90 | 11 | 20 | M8 | 20.1 | 10 | +0.015 0 | MSTM10-30 | M10-35x4 pcs. | |
40 | 150~500 | 125 | 60 | 80 | 95 | 22.7 | |||||||||||
50 | 200~600 | 140 | 70 | 100 | 50 | 106 | 14 | 24 | M10 | 30.8 | M12-35x4 pcs. |