We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI CLTB20, make contact with FAMAGA, the world's prime distributor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are portrayed in the quality of outputs and special attention to each client. We respect everyone, who conspired with us - therefore, our regular purchasers accept the most acceptable purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Dominican Republic, Bhutan, Cuba, Honduras, Peru, Iraq, India, China, East Timor, Suriname, Iceland, Togo, Zimbabwe, Gambia, Georgia, Seychelles, Israel, Guyana, Sweden, Antigua and Barbuda, Latvia, Argentina, Ireland, Philippines, Brunei, Benin, Nigeria, Samoa, South Korea, Australia, Angola, Armenia, Burkina Faso, Kuwait, Haiti, El Salvador, Tajikistan, Nepal, United States, Costa Rica, Vietnam, Syria, Estonia. A well-elaborated logistics system and a partnership network allow us to send our items anywhere in the world as soon as possible without disreputing product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or book, call us by phone or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Accessory | ||
Side Mounting | Side Mounting, Dowel Hole | Side Mounting | Side Mounting, Dowel Hole | ||
CLTB | CLPK | Steel for General Structure | Black Oxide | Hex Socket Head Cap Screw | Hex Socket Head Set Screw Dowel Pin |
CLTM | CLPM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | Hex Socket Head Cap Screw (Stainless Steel) Dowel Pin | |
CLTBM | - | Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw | - |
CLTAM | - | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | ||
CLTS | - | EN 1.4301 Equiv. | - |
DH7 | Accessory: Dowel Pin |
20 | MSTM6-20 |
25 | MSTM8-20 |
30 | |
35 | MSTM10-30 |
40 | |
50 |
Part Number |
CLTB35 CLPM30 |
Part Number | A | B | L | T | F | G | K | h | H | E | d | d1 | Z | MA | W | PH7 | Included Screw | Unit Price | ||||||||||
Side Mounting | Side Mounting, Dowel Hole | |||||||||||||||||||||||||||
Type | DH7 | Tolerance | CLTB | CLTM | CLTBM | CLTAM | CLTS | CLPK | CLPM | |||||||||||||||||||
Side Mounting CLTB CLTM CLTBM CLTAM CLTS | Side Mounting, Dowel Holes CLPK CLPM | 10 | +0.015 0 | 40 | 35 | 32 | 10 | 30 | 18 | 4.4 | 15 | 10.5 | 20 | 5 | 8 | 4.5 | M4 | 2 | - | - | M4-15, 2 pcs. | - | - | |||||
12 | +0.018 0 | 44 | 34 | 5.5 | 14 | 11.5 | 22 | 5.5 | 9 | 5.5 | M5 | M5-15, 2 pcs. | - | - | ||||||||||||||
15 | 50 | 40 | 38 | 12 | 38 | 20 | 6.6 | 18 | 12.5 | 25 | 6.6 | 11 | 6.5 | M6 | M6-15, 2 pcs. | - | - | |||||||||||
16 | M6-15, 2 pcs. | - | - | - | ||||||||||||||||||||||||
20 | +0.021 0 | 65 | 45 | 45 | 12 | 50 | 25 | 6.6 | 22 | 15 | 30 | 6.6 | 11 | 6.5 | M6 | 2 | 6 | +0.012 0 | M6-20, 2 pcs. | |||||||||
25 | 80 | 60 | 53 | 60 | 36 | 9 | 27 | 18 | 35 | 8 | +0.015 0 | M6-25, 2 pcs. | ||||||||||||||||
30 | 90 | 60 | 15 | 70 | 30 | 21 | 45 | 9 | 14 | 9 | M8 | M8-35, 2 pcs. | ||||||||||||||||
35 | +0.025 0 | 105 | 80 | 68 | 15 | 80 | 40 | 11 | 35 | 24 | 50 | 9 | 14 | 9 | M8 | 3 | 10 | +0.015 0 | M8-40, 2 pcs. | - | ||||||||
40 | 115 | 76 | 90 | 38 | 27 | 60 | 11 | 17.5 | 11 | M10 | M10-45, 2 pcs. | - | ||||||||||||||||
50 | 135 | 100 | 87 | 18 | 105 | 50 | 14 | 43 | 33 | 70 | M10-50, 2 pcs. | - | ||||||||||||||||
The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. CLTS is applicable up to D=30, and CLPK and CLPM are available from D=20 and up. D=16 of CLTBM is not available. |