We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI CLPM35, catch up with FAMAGA, the world's chief producer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of products and individual attention to each buyer. We esteem everyone, who liased with us - hence, our regular clients obtain the most favorable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such consumers, and we constantly form new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Croatia, Canada, Eritrea, Vietnam, Kuwait, Georgia, Montenegro, Madagascar, Jordan, Turkey, Afghanistan, Panama, Denmark, Iceland, Ireland, Saudi Arabia, Singapore, Jamaica, Malaysia, Moldova, South Sudan, Bangladesh, Mauritius, Antigua and Barbuda, Egypt, Tunisia, Syria, Senegal, Suriname, Nicaragua, United Arab Emirates, Benin, Bulgaria, Fiji, Tanzania, Botswana, Samoa, Ukraine, East Timor, Zambia, Seychelles, Peru, Brunei. A well-shaped logistics bond and a partnership network help us to ship our goods anywhere in the earth with no delay without undermining product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Accessory | ||
Side Mounting | Side Mounting, Dowel Hole | Side Mounting | Side Mounting, Dowel Hole | ||
CLTB | CLPK | Steel for General Structure | Black Oxide | Hex Socket Head Cap Screw | Hex Socket Head Set Screw Dowel Pin |
CLTM | CLPM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | Hex Socket Head Cap Screw (Stainless Steel) Dowel Pin | |
CLTBM | - | Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw | - |
CLTAM | - | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | ||
CLTS | - | EN 1.4301 Equiv. | - |
DH7 | Accessory: Dowel Pin |
20 | MSTM6-20 |
25 | MSTM8-20 |
30 | |
35 | MSTM10-30 |
40 | |
50 |
Part Number |
CLTB35 CLPM30 |
Part Number | A | B | L | T | F | G | K | h | H | E | d | d1 | Z | MA | W | PH7 | Included Screw | Unit Price | ||||||||||
Side Mounting | Side Mounting, Dowel Hole | |||||||||||||||||||||||||||
Type | DH7 | Tolerance | CLTB | CLTM | CLTBM | CLTAM | CLTS | CLPK | CLPM | |||||||||||||||||||
Side Mounting CLTB CLTM CLTBM CLTAM CLTS | Side Mounting, Dowel Holes CLPK CLPM | 10 | +0.015 0 | 40 | 35 | 32 | 10 | 30 | 18 | 4.4 | 15 | 10.5 | 20 | 5 | 8 | 4.5 | M4 | 2 | - | - | M4-15, 2 pcs. | - | - | |||||
12 | +0.018 0 | 44 | 34 | 5.5 | 14 | 11.5 | 22 | 5.5 | 9 | 5.5 | M5 | M5-15, 2 pcs. | - | - | ||||||||||||||
15 | 50 | 40 | 38 | 12 | 38 | 20 | 6.6 | 18 | 12.5 | 25 | 6.6 | 11 | 6.5 | M6 | M6-15, 2 pcs. | - | - | |||||||||||
16 | M6-15, 2 pcs. | - | - | - | ||||||||||||||||||||||||
20 | +0.021 0 | 65 | 45 | 45 | 12 | 50 | 25 | 6.6 | 22 | 15 | 30 | 6.6 | 11 | 6.5 | M6 | 2 | 6 | +0.012 0 | M6-20, 2 pcs. | |||||||||
25 | 80 | 60 | 53 | 60 | 36 | 9 | 27 | 18 | 35 | 8 | +0.015 0 | M6-25, 2 pcs. | ||||||||||||||||
30 | 90 | 60 | 15 | 70 | 30 | 21 | 45 | 9 | 14 | 9 | M8 | M8-35, 2 pcs. | ||||||||||||||||
35 | +0.025 0 | 105 | 80 | 68 | 15 | 80 | 40 | 11 | 35 | 24 | 50 | 9 | 14 | 9 | M8 | 3 | 10 | +0.015 0 | M8-40, 2 pcs. | - | ||||||||
40 | 115 | 76 | 90 | 38 | 27 | 60 | 11 | 17.5 | 11 | M10 | M10-45, 2 pcs. | - | ||||||||||||||||
50 | 135 | 100 | 87 | 18 | 105 | 50 | 14 | 43 | 33 | 70 | M10-50, 2 pcs. | - | ||||||||||||||||
The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. CLTS is applicable up to D=30, and CLPK and CLPM are available from D=20 and up. D=16 of CLTBM is not available. |