We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI CCTFM20, make contact with FAMAGA, the world's principle company of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of outputs and special attention to each orderer. We respect everyone, who collaborated with us - hence, our regular consumers pick up the most acceptable purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such consumers, and we constantly sign new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, San Marino, Cuba, Côte d\'Ivoire, Estonia, Georgia, Samoa, Lesotho, Djibouti, Equatorial Guinea, Mauritius, Ukraine, Sierra Leone, Syria, Albania, Laos, Chile, Latvia, Tunisia, Eritrea, Angola, China, Luxembourg, Kazakhstan, United Arab Emirates, Fiji, Macedonia, Indonesia, Kiribati, Russia, Iraq, Azerbaijan, Cyprus, Finland, Mexico, Algeria, Panama, Lithuania, Comoros, Mozambique, Namibia, Malaysia, Rwanda, Suriname, Burkina Faso, Haiti. A well-built logistics connection and a partnership network guide us to dispatch our units anywhere in the earth promptly without disreputing product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Post | Bracket | Accessory | ||||
Solid | Hollow | MaterialHardness | Surface Treatment | Material | Surface Treatment | Solid | Hollow |
CCTN | CCTA | EN 1.1191 Equiv. Induction Hardened | - | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw | Set Screw Cap (P.2143) |
MCCTN | MCCTA | EN 1.1191 Equiv. | Electroless Nickel Plating | ||||
MCCTNM | MCCTAM | EN 1.1191 Equiv. | Electroless Nickel Plating | EN-JL 1040 Equiv. | Electroless Nickel Plating |
Type | Material | Surface Treatment | Accessory |
CCTF | EN-JL 1040 Equiv. | Black oxide or Phosphate Conversion Coat | Set Screw |
CCTFM | Electroless Nickel Plating |
Part Number | - | L |
CCTN20 CCTFM35 | - | 350 |
Part Number | L 1mm Increment | A | B | F | G | E | (H) | T | ? | h | K(d1) | (R) | M | (d) | |||
Type | Dg6 | ||||||||||||||||
Set | Bracket only | 10 | -0.005 -0.014 | 50~250 | 45 | 30 | 33 | 15 | 23 | 26 | 9 | 18 | 13 | M5 (4.3) | 13 | M4 | 6.0 |
12 | -0.006 -0.017 | 50~300 | 48 | 33 | 35 | 18 | 25 | 28 | 14 | 14 | |||||||
(Solid) CCTN MCCTN MCCTNM | (Hollow) CCTA MCCTA MCCTAM | CCTF CCTFM | 15 | 75~350 | 55 | 35 | 40 | 20 | 28 | 31.5 | 20 | 16 | M6 (5.2) | 15.5 | M5 | 10.0 | |
20 | -0.007 -0.020 | 75~400 | 65 | 40 | 50 | 22 | 36 | 40 | 9 | 25 | 20 | 20 | M5 | 11.7 | |||
25 | 75~450 | 80 | 48 | 60 | 25 | 44 | 49.5 | 30 | 25 | M8 (6.8) | 24.5 | M6 | 15.2 | ||||
30 | 100~450 | 85 | 65 | 49 | 55 | 28 | 27 | 16.0 | |||||||||
35 | -0.009 -0.025 | 125~500 | 105 | 60 | 80 | 30 | 59 | 65.5 | 12 | 40 | 33 | M10 (8.6) | 32.5 | M8 | 20.1 | ||
40 | 150~500 | 110 | 85 | 64 | 71 | 36 | 35 | 22.7 | |||||||||
50 | 200~600 | 120 | 70 | 95 | 40 | 74 | 81 | 50 | 41 | 40 | M10 | 30.8 |