We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
DIN172A-D4.5-L8
Description
DIN 172 Headed press-fit drill bushings
Stock availability:
On request
If you are pursuing MISUMI DIN172A-D4.5-L8, connect FAMAGA, the world's the best producer of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each purchaser. We respect everyone, who cooperated with us - therefore, our regular buyers get the most desirable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Colombia, Myanmar, Ghana, Madagascar, Cuba, India, Estonia, France, Honduras, Burkina Faso, Fiji, Rwanda, Brunei, Canada, Poland, Russia, Comoros, Senegal, Croatia, Chile, Malaysia, South Sudan, Philippines, Mali, Kyrgyzstan, Samoa, Peru, Botswana, Czech Republic, Syria, Andorra, Dominica, United Arab Emirates, Yemen, Equatorial Guinea, East Timor, Mexico, Ukraine, South Korea, Afghanistan, Guatemala, Tajikistan. A well-shaped logistics system and a partnership network guide us to send our goods anywhere in the world on-time without undermining product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as stay in control.
To consult or place an order, call us by phone or write to the online chat on our site. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Surface | D | Material | Hardness |
DIN172A | Ground Surface | 2.5 - 26 | 1.0718 | 62 +/- 2 HRC |
28 - 35 | 1.7131 |
Part Number | L | |||||
Type | D Callout | |||||
DIN172A | - | D10.0 | - | L12 |
Type | D | L | d n6 | Thickness (T) | R | H | T | ||
F7 | Short | Medium | Long | ||||||
DIN172A | 2.5 | 6 | 9 | - | 5 | 2 | 1 | 8 | 2 |
3 3.3 | 8 | 12 | 16 | 6 | 2.5 | 9 | 3 | ||
3.5 4 | 7 | 10 | |||||||
4.2 4.5 5 | 8 | 11 | |||||||
5.5 6 | 10 | 16 | 20 | 10 | 3 | 1.5 | 13 | ||
6.5 6.8 7 7.5 8 | 12 | 15 | |||||||
8.5 9 9.5 10 | 12 | 20 | 25 | 15 | 2 | 18 | |||
10.2 10.5 11 12 | 18 | 4 | 22 | 4 | |||||
13 14 15 | 16 | 28 | 36 | 22 | 26 | ||||
16 17 18 | 26 | 30 | |||||||
19 20 22 | 20 | 36 | 45 | 30 | 5 | 3 | 34 | 5 | |
24 25 26 | 35 | 39 | |||||||
28 30 | 25 | 45 | 56 | 42 | 46 | ||||
35 | 48 | 52 |