We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARP061R
Description
[NAAMS] Locating Pin With Cross Hole Pin ARP Small Head
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking MISUMI ARP061R, make contact with FAMAGA, the world's prime distributor of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each consumer. We praise everyone, who conspired with us - so, our regular purchasers procure the most convenient purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such clients, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Fiji, Guatemala, United States, Bahamas, Guyana, Brazil, Lebanon, Oman, Mauritania, The Gambia, New Zealand, Malaysia, Finland, Ghana, Peru, Madagascar, Samoa, Chile, Sierra Leone, Nicaragua, Lithuania, Netherlands, Russia, Mongolia, Hungary, Albania, Serbia, Botswana, Libya, Tanzania, Burkina Faso, Haiti, China, Mozambique, Syria, Georgia, Qatar, Cameroon, Sweden, Namibia, Nepal, Mauritius, Yemen, Armenia. A advanced logistics series and a partnership network cheer us to ship our units anywhere in the world with no delay without damaging product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or book, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Head Tip
|
| Type | Surface Treatment | Material | Hardness | |
| ARP | NAAMS Standard | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
| ARPRS | A Configurable | P -Plain T -TiN | ||
| Dimension | Tol. | Finish | Geometric | |
| 0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
| 0.00 | �0.03 | 3.0μm | ||
| 0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
| Part Number | ||||||||
| Type | D Head Dia. Callout | A Lead Length Callout | Retractable | Coating | ||||
| ARP | 08 | 4 | R | |||||
| ARP | 08 | 4 | R | T |
| Part Number | ||||||||
| Type | Coating | Tip Shape | D Head Dia. Callout | A Lead (1mm Inc.) | ||||
| ARPRS | T | A | 08 | - | A42 |
| Type | D Head Dia. Callout (Actual) | A Lead Length | Retractable | Coating | B Rad | C Rad | |||||||||
| 10 mm | 15 mm | 25 mm | 35 mm | 45 mm | 55 mm | 65 mm | 75 mm | 85 mm | 95 mm | ||||||
| ARP (Hole -0.28) | 06 (5.72) | 1 | 2 | 3 | 4 | 5 | 6 | - | - | - | R- Retractable | None-Plain T- TiN | 1.0 | 18.0 | |
| 08 (7.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | - | 1.0 | 24.0 | ||||
| 10 (9.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 2.0 | 30.0 | |||
| 13 (12.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 2.0 | 39.0 | |||
| 16 (15.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 2.0 | 48.0 |
| Type | Coating | Tip Shape | D Head Dia. Callout (Actual) | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
| Tip A | Tip B | Tip C | ||||||
| ARPRS (Hole -0.28) | P-Plain T- TiN | A B C | 06 (5.72) | 5 ~ 55 | 1.0 | 18.0 | 9.0 | D/2 |
| 08 (7.72) | 5 ~ 75 | 24.0 | 12.0 | D/2 | ||||
| 10 (9.72) | 5 ~ 100 | 2.0 | 30.0 | 15.0 | D/2 | |||
| 13 (12.72) | 39.0 | 19.5 | D/2 | |||||
| 16 (15.72) | 48.0 | 24.0 | D/2 |
