We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARFESSTB-E[6-16/0.01]-F[6-16/0.01]-A[15-100/1]
Description
[NAAMS] Locating Pin With Cross Hole A&E Configurable Small Head
Stock availability:
On request
If you are looking for MISUMI ARFESSTB-E[6-16/0.01]-F[6-16/0.01]-A[15-100/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are outlined in the quality of merchandises and personalseparate attention to each orderer. We value everyone, who cooperated with us - so, our regular buyers procure the most convenient purchase forms and discounts on the factory-made equipment market. At present, there are more than 3500 such clients, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, France, Kenya, Guinea-Bissau, Eritrea, Dominica, Gambia, Papua New Guinea, Equatorial Guinea, Benin, Latvia, Jamaica, Niger, Vietnam, India, Sweden, Paraguay, East Timor, Laos, South Sudan, Liberia, Finland, Mozambique, Botswana, Greece, Indonesia, Nicaragua, Afghanistan, Samoa, Senegal, El Salvador, Norway, Cape Verde, Togo, The Gambia, Seychelles, Angola, Cyprus, Zimbabwe, Egypt. A advanced logistics series and a partnership network assist us to conduct our units anywhere in the earth with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness |
ARFERS | Front Hole | P -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARFESS | Side Hole | |||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||||
Type | Coating | Tip Shape | E Flat | F Flat | A Lead Length Callout | |||||
ARFERS | T | A | - | E12.01 | - | F11.01 | - | A42 | ||
ARFESS | P | C | - | E12.01 | - | F11.01 | - | A42 |
Type | Coating | Tip Shape | E Flat (0.01mm Inc. ) | F Flat (0.01mm Inc. ) | D Diameter | A Lead Length (1 mm Inc.) | B Rad | C Rad |
ARFERS (Front Hole) ARFESS (Side Hole) | P- Plain T- TiN | A B C | 6.00 ~ 10.00 | 6.00 ~ 19.00 | D= E/F+1.0 | 10 ~ 100 | 2.0 | Tip Shape A C=Dx3.0 (O≤16) C=Dx2.0 (O>16) Tip Shape B C=Dx1.5 (O≤16) C=Dx1.0 (O>16) Tip Shape C C=Dx0.5 |
10.01 ~ 16.00 | 6.00 ~ 19.00 | D= E/F+0.75 |