We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARFERSTB-E[6-16/0.01]-F[6-16/0.01]-A[15-100/1]
Description
[NAAMS] Locating Pin With Cross Hole A&E Configurable Small Head
Stock availability:
On request
If you are pursuing MISUMI ARFERSTB-E[6-16/0.01]-F[6-16/0.01]-A[15-100/1], reach FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of merchandises and special attention to each purchaser. We value everyone, who conspired with us - so, our regular consumers receive the most convenient purchase forms and discounts on the factory-made equipment market. At present, there are more than 3500 such customers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Guinea, Nigeria, Zimbabwe, Belize, Singapore, Dominican Republic, Papua New Guinea, Belarus, Kuwait, Panama, Kyrgyzstan, Cape Verde, Zambia, Haiti, Senegal, Canada, Argentina, Jamaica, Liberia, Ecuador, Ireland, Nicaragua, Madagascar, Mauritania, Niger, Morocco, The Gambia, Swaziland, Guatemala, Uruguay, Armenia, Finland, Serbia, Qatar, Indonesia, Malaysia, Togo, Croatia, Mozambique. A well-developed logistics chains and a partnership network assist us to deliver our units anywhere in the earth with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness |
ARFERS | Front Hole | P -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARFESS | Side Hole | |||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||||
Type | Coating | Tip Shape | E Flat | F Flat | A Lead Length Callout | |||||
ARFERS | T | A | - | E12.01 | - | F11.01 | - | A42 | ||
ARFESS | P | C | - | E12.01 | - | F11.01 | - | A42 |
Type | Coating | Tip Shape | E Flat (0.01mm Inc. ) | F Flat (0.01mm Inc. ) | D Diameter | A Lead Length (1 mm Inc.) | B Rad | C Rad |
ARFERS (Front Hole) ARFESS (Side Hole) | P- Plain T- TiN | A B C | 6.00 ~ 10.00 | 6.00 ~ 19.00 | D= E/F+1.0 | 10 ~ 100 | 2.0 | Tip Shape A C=Dx3.0 (O≤16) C=Dx2.0 (O>16) Tip Shape B C=Dx1.5 (O≤16) C=Dx1.0 (O>16) Tip Shape C C=Dx0.5 |
10.01 ~ 16.00 | 6.00 ~ 19.00 | D= E/F+0.75 |