We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARFERSPC-E[6-16/0.01]-F[6-16/0.01]-A[15-100/1]
Description
[NAAMS] Locating Pin With Cross Hole A&E Configurable Small Head
Stock availability:
On request
If you are seeking MISUMI ARFERSPC-E[6-16/0.01]-F[6-16/0.01]-A[15-100/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of products and private attention to each orderer. We esteem everyone, who cooperated with us - so, our regular purchasers procure the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Bhutan, Iceland, Tajikistan, Burundi, Romania, Cuba, Slovenia, Burkina Faso, Nepal, United Arab Emirates, Czech Republic, Estonia, Lithuania, Zimbabwe, Turkey, Oman, Moldova, Philippines, Gambia, Belize, Guatemala, Fiji, Indonesia, Belarus, Slovakia, Suriname, Georgia, Kuwait, Egypt, Central African Republic, Nigeria, Samoa, Peru, Cyprus, Brunei, Qatar, Djibouti, Malaysia, Seychelles. A well-elaborated logistics series and a partnership network cheer us to send our items anywhere in the earth quickly without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is rising every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness |
ARFERS | Front Hole | P -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARFESS | Side Hole | |||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||||
Type | Coating | Tip Shape | E Flat | F Flat | A Lead Length Callout | |||||
ARFERS | T | A | - | E12.01 | - | F11.01 | - | A42 | ||
ARFESS | P | C | - | E12.01 | - | F11.01 | - | A42 |
Type | Coating | Tip Shape | E Flat (0.01mm Inc. ) | F Flat (0.01mm Inc. ) | D Diameter | A Lead Length (1 mm Inc.) | B Rad | C Rad |
ARFERS (Front Hole) ARFESS (Side Hole) | P- Plain T- TiN | A B C | 6.00 ~ 10.00 | 6.00 ~ 19.00 | D= E/F+1.0 | 10 ~ 100 | 2.0 | Tip Shape A C=Dx3.0 (O≤16) C=Dx2.0 (O>16) Tip Shape B C=Dx1.5 (O≤16) C=Dx1.0 (O>16) Tip Shape C C=Dx0.5 |
10.01 ~ 16.00 | 6.00 ~ 19.00 | D= E/F+0.75 |