We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARFERLTA-E[16.01-25/0.01]-F[16.01-25/0.01]-A[15-100/1]
Description
[NAAMS] Locating Pin With Cross Hole A&E Configurable Large Head
Stock availability:
On request
If you are seeking MISUMI ARFERLTA-E[16.01-25/0.01]-F[16.01-25/0.01]-A[15-100/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are represented in the quality of goods and private attention to each purchaser. We admire everyone, who conspired with us - hence, our regular purchasers receive the most desirable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4000 such buyers, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Eritrea, Albania, Cambodia, Georgia, Chad, Palestine, Kyrgyzstan, Uruguay, Kenya, Mexico, Mongolia, Botswana, Burma, Nepal, Malawi, Egypt, Tonga, Nicaragua, The Gambia, Chile, Belize, Turkey, Rwanda, Burkina Faso, Uganda, Malta, New Zealand, Hungary, East Timor, Peru, Namibia, Lithuania, Tanzania, Thailand, Eswatini, Armenia, Denmark, Austria. A well-elaborated logistics connection and a partnership network allow us to send our goods anywhere in the earth with no delay without discrediting product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To ask a question or make a request, call us by phone or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness |
ARFERL | Front Hole | P -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARFESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||||
Type | Coating | Tip Shape | E Flat Callout | F Flat Callout | A Lead Length Callout | |||||
ARFERL | T | A | - | E16.05 | - | F15.07 | - | A42 | ||
ARFESL | P | A | - | E16.05 | - | F15.07 | - | A42 |
Type | Coating | Tip Shape | E Flat (0.01mm Inc. ) | F Flat (0.01mm Inc. ) | D Diameter | A Lead Length (1 mm Inc.) | B Rad | C Rad |
ARFERL (Front Hole) ARFESL (Side Hole) | P- Plain T- TiN | A B C | 16.10 ~ 20.00 | 16.10 ~ 25.00 | D= E/F+0.45 | 10 ~ 100 | 2.0 | A C=Dx3.0 (O≤16) C=Dx2.0 (O>16) B C=Dx1.5 (O≤16) C=Dx1.0 (O>16) C C=Dx0.5 |
20.01 ~ 25.00 | 16.10 ~ 25.00 | D= E/F+0.35 |