We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARESLTC25-A[10-100/1]
Description
[NAAMS] Locating Pin With Cross Hole Pin ARE Large Head
Stock availability:
On request
If you are seeking MISUMI ARESLTC25-A[10-100/1], call FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and particular attention to each purchaser. We cherish everyone, who cooperated with us - therefore, our regular consumers pick up the most acceptable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 3500 such customers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Samoa, Costa Rica, Tanzania, Mozambique, Sri Lanka, India, Malawi, Croatia, Thailand, Liechtenstein, Belgium, Jamaica, Sudan, Lebanon, Lithuania, Chad, The Gambia, Kazakhstan, Guatemala, Fiji, Poland, South Sudan, Hungary, Switzerland, Antigua and Barbuda, Jordan, Andorra, Paraguay, Nicaragua, Iceland, Cameroon, Mali, Mauritius, Belize, Iraq, Senegal, Peru, Bulgaria, Central African Republic, Montenegro, China. A well-shaped logistics series and a partnership network allow us to dispatch our items anywhere in the planet with no delay without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To consult or make a request, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
ARE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARERL | A Configurable | Front Hole | P -Plain T -TiN | ||
ARESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||
Type | E Flat Callout | A Lead Length Callout | Retractable | Coating | ||||
ARE | 19 | 4 | R | |||||
ARE | 16 | 9 | S | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
ARERL | P | A | 25 | - | A42 | |||
ARESL | T | C | 16 | - | A99 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating | For Slot | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | ||||||||
ARE (Slot -0.28) | 16 (15.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R -Front Hole S -Side Hole | None-Plain T- TiN | 16x22 | 16.35 | 2.0 | 48.0 |
19 (18.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19x25 | 19.27 | 2.0 | 38.0 | |||
25 (24.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25x31 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | For Slot | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||||
ARERL (Front Hole) ARESL (Side Hole) (Slot-0.28) | P-Plain T- TiN | A B C | 16 (15.72) | 10~ 100 | 16x22 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.72) | 19x25 | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.72) | 25x31 | 25.17 | 50.0 | 25.0 | D/2 |