We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARE257ST
Description
[NAAMS] Locating Pin With Cross Hole Pin ARE Large Head
Stock availability:
On request
If you are pursuing MISUMI ARE257ST, get in touch with FAMAGA, the world's leading producer of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of products and private attention to each buyer. We praise everyone, who conspired with us - therefore, our regular customers receive the most attractive purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such customers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Haiti, Cameroon, Tunisia, Bahamas, Bulgaria, Burma, United Arab Emirates, New Zealand, Zambia, Grenada, Uzbekistan, Comoros, The Gambia, Brazil, India, Mozambique, Norway, Algeria, Greece, South Korea, Antigua and Barbuda, Chad, Jordan, North Korea, Belize, Andorra, Egypt, Ecuador, Yemen, Rwanda, Israel, Kazakhstan, Tonga, Ireland, Uganda, Bolivia, Czech Republic, Sierra Leone, Ukraine, Namibia, Chile, Guatemala, East Timor, Botswana, Armenia, Morocco. A well-developed logistics system and a partnership network assist us to conduct our products anywhere in the earth promptly without compromising product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To inquire or order, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
ARE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARERL | A Configurable | Front Hole | P -Plain T -TiN | ||
ARESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||
Type | E Flat Callout | A Lead Length Callout | Retractable | Coating | ||||
ARE | 19 | 4 | R | |||||
ARE | 16 | 9 | S | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
ARERL | P | A | 25 | - | A42 | |||
ARESL | T | C | 16 | - | A99 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating | For Slot | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | ||||||||
ARE (Slot -0.28) | 16 (15.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R -Front Hole S -Side Hole | None-Plain T- TiN | 16x22 | 16.35 | 2.0 | 48.0 |
19 (18.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19x25 | 19.27 | 2.0 | 38.0 | |||
25 (24.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25x31 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | For Slot | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||||
ARERL (Front Hole) ARESL (Side Hole) (Slot-0.28) | P-Plain T- TiN | A B C | 16 (15.72) | 10~ 100 | 16x22 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.72) | 19x25 | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.72) | 25x31 | 25.17 | 50.0 | 25.0 | D/2 |