We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARE195RT
Description
[NAAMS] Locating Pin With Cross Hole Pin ARE Large Head
Stock availability:
On request
If you are looking for MISUMI ARE195RT, make contact with FAMAGA, the world's key vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are portrayed in the quality of outputs and special attention to each purchaser. We respect everyone, who engaged with us - therefore, our regular clients obtain the most convenient purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4500 such clients, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Ecuador, Chile, Slovakia, Turkmenistan, Panama, Ukraine, Comoros, Uruguay, Bhutan, Guatemala, Iraq, Senegal, Grenada, Austria, Guyana, Tanzania, Uganda, Saudi Arabia, Niger, Brazil, Israel, Argentina, Kyrgyzstan, Tajikistan, Namibia, North Korea, Liechtenstein, Nicaragua, Tunisia, Rwanda, Haiti, India, Latvia, Antigua and Barbuda, Samoa, Ghana, Sudan, Belize, Zimbabwe, Zambia, East Timor, Turkey, Iceland. A advanced logistics bond and a partnership network guide us to ship our products anywhere in the earth quickly without undermining product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this number is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
ARE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARERL | A Configurable | Front Hole | P -Plain T -TiN | ||
ARESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||
Type | E Flat Callout | A Lead Length Callout | Retractable | Coating | ||||
ARE | 19 | 4 | R | |||||
ARE | 16 | 9 | S | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
ARERL | P | A | 25 | - | A42 | |||
ARESL | T | C | 16 | - | A99 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating | For Slot | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | ||||||||
ARE (Slot -0.28) | 16 (15.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R -Front Hole S -Side Hole | None-Plain T- TiN | 16x22 | 16.35 | 2.0 | 48.0 |
19 (18.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19x25 | 19.27 | 2.0 | 38.0 | |||
25 (24.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25x31 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | For Slot | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||||
ARERL (Front Hole) ARESL (Side Hole) (Slot-0.28) | P-Plain T- TiN | A B C | 16 (15.72) | 10~ 100 | 16x22 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.72) | 19x25 | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.72) | 25x31 | 25.17 | 50.0 | 25.0 | D/2 |