We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ARE162ST
Description
[NAAMS] Locating Pin With Cross Hole Pin ARE Large Head
Stock availability:
On request
If you are inspecting MISUMI ARE162ST, make contact with FAMAGA, the world's prime company of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are portrayed in the quality of outputs and individual attention to each customer. We respect everyone, who collaborated with us - therefore, our regular consumers accept the most beneficial purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Rwanda, Palestine, Papua New Guinea, Swaziland, Uruguay, Liberia, Saudi Arabia, Angola, Grenada, Burma, Cape Verde, Malta, Mali, Qatar, Mauritania, Iran, China, Eswatini, Jordan, Guyana, Cameroon, Argentina, Turkmenistan, Montenegro, Hungary, Belarus, Austria, Tonga, Brazil, Bangladesh, Macedonia, Paraguay, Ecuador, India, Guatemala, Kyrgyzstan, Israel, Zambia, Bosnia and Herzegovina, Lithuania, Chile, Greece, Algeria. A well-built logistics series and a partnership network assist us to send our units anywhere in the world with no delay without disreputing product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is growing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
ARE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
ARERL | A Configurable | Front Hole | P -Plain T -TiN | ||
ARESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||||
Type | E Flat Callout | A Lead Length Callout | Retractable | Coating | ||||
ARE | 19 | 4 | R | |||||
ARE | 16 | 9 | S | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
ARERL | P | A | 25 | - | A42 | |||
ARESL | T | C | 16 | - | A99 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating | For Slot | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | ||||||||
ARE (Slot -0.28) | 16 (15.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R -Front Hole S -Side Hole | None-Plain T- TiN | 16x22 | 16.35 | 2.0 | 48.0 |
19 (18.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19x25 | 19.27 | 2.0 | 38.0 | |||
25 (24.72) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25x31 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | For Slot | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||||
ARERL (Front Hole) ARESL (Side Hole) (Slot-0.28) | P-Plain T- TiN | A B C | 16 (15.72) | 10~ 100 | 16x22 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.72) | 19x25 | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.72) | 25x31 | 25.17 | 50.0 | 25.0 | D/2 |