We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQRLTC18-A[5-100/1]
Description
[NAAMS] Locating Pin With Cross Hole APQ Large Head
Stock availability:
On request
If you are questing MISUMI APQRLTC18-A[5-100/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and individual attention to each client. We value everyone, who conspired with us - thus, our regular clients procure the most favorable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Rwanda, Colombia, Honduras, Bosnia and Herzegovina, Suriname, Cameroon, Estonia, The Bahamas, The Gambia, Iran, Macedonia, Swaziland, Poland, Iraq, South Korea, Philippines, Turkmenistan, Bolivia, Haiti, Russia, Afghanistan, Indonesia, Jamaica, Togo, Burkina Faso, Botswana, Argentina, Mozambique, Qatar, Mauritania, Peru, Cyprus, Ireland, Bulgaria, Madagascar, Laos, Kuwait, Zimbabwe, Dominica, Moldova. A well-built logistics network and a partnership network allow us to conduct our items anywhere in the earth with no delay without compromising product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | NAAMS Standard | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQRL | A Configurable | P -Plain T -TiN | ||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head | A Lead Length Callout | Retractable | |||
APQ | 18 | 4 | R |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head | |||||
APQRL | T | A | 19 | - | A42 |
Type | D Head Callout | A Lead Length | Retractable | Coating (Optional) | B Rad | C Rad | |||||||
10 mm | 15 mm | 25 mm | 25 mm | 45 mm | 55 mm | 65 mm | 75 mm | ||||||
APQ (Hole h6) | 16 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | R -Retractable | None-Plain T- TiN | 2.0 | 48.0 |
18 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | |||
20 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | |||
25 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
30 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
35 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
40 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 |
Type | Coating | Tip Shape | D Head Callout | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQRL (Hole-h6) | P-Plain T- TiN | A B C | 16 | 5 ~ 100 | 2.0 | 48.0 | 24.0 | D/2 |
18 | 38.0 | 19.0 | D/2 | |||||
20 | 38.0 | 19.0 | D/2 | |||||
25 | 50.0 | 25.0 | D/2 | |||||
30 | 50.0 | 25.0 | D/2 | |||||
35 | 50.0 | 25.0 | D/2 | |||||
40 | 50.0 | 25.0 | D/2 |