We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQRLTC16-A[5-100/1]
Description
[NAAMS] Locating Pin With Cross Hole APQ Large Head
Stock availability:
On request
If you are seeking MISUMI APQRLTC16-A[5-100/1], call FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are portrayed in the quality of spare parts and private attention to each customer. We cherish everyone, who worked with us - therefore, our regular consumers get the most convenient purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 3500 such customers, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Poland, Lebanon, Burma, South Africa, Uruguay, Philippines, Nigeria, Uzbekistan, Antigua and Barbuda, Nepal, Djibouti, Thailand, Kyrgyzstan, Zimbabwe, Rwanda, Malta, Nicaragua, Ukraine, Iraq, Belize, Kazakhstan, Bulgaria, Cameroon, Macedonia, Israel, Namibia, United States, Czech Republic, Andorra, Chile, Laos, Denmark, Brazil, Brunei, Montenegro, Albania, Iran, Sierra Leone, Uganda, Ireland. A well-developed logistics series and a partnership network guide us to dispatch our units anywhere in the planet immediately without damaging product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To consult or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | NAAMS Standard | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQRL | A Configurable | P -Plain T -TiN | ||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head | A Lead Length Callout | Retractable | |||
APQ | 18 | 4 | R |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head | |||||
APQRL | T | A | 19 | - | A42 |
Type | D Head Callout | A Lead Length | Retractable | Coating (Optional) | B Rad | C Rad | |||||||
10 mm | 15 mm | 25 mm | 25 mm | 45 mm | 55 mm | 65 mm | 75 mm | ||||||
APQ (Hole h6) | 16 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | R -Retractable | None-Plain T- TiN | 2.0 | 48.0 |
18 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | |||
20 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | |||
25 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
30 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
35 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
40 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 |
Type | Coating | Tip Shape | D Head Callout | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQRL (Hole-h6) | P-Plain T- TiN | A B C | 16 | 5 ~ 100 | 2.0 | 48.0 | 24.0 | D/2 |
18 | 38.0 | 19.0 | D/2 | |||||
20 | 38.0 | 19.0 | D/2 | |||||
25 | 50.0 | 25.0 | D/2 | |||||
30 | 50.0 | 25.0 | D/2 | |||||
35 | 50.0 | 25.0 | D/2 | |||||
40 | 50.0 | 25.0 | D/2 |