We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQRLTA35-A[5-100/1]
Description
[NAAMS] Locating Pin With Cross Hole APQ Large Head
Stock availability:
On request
If you are questing MISUMI APQRLTA35-A[5-100/1], communicate with FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are symbolized in the quality of products and individual attention to each buyer. We esteem everyone, who liased with us - thus, our regular clients accept the most attractive purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Austria, Romania, Eritrea, Cuba, Mauritius, Denmark, Finland, Malaysia, Uganda, Iceland, Sweden, Afghanistan, Canada, Mexico, Panama, Burundi, Estonia, Grenada, Jamaica, Yemen, Nepal, Cyprus, The Bahamas, Luxembourg, Comoros, Egypt, Chile, Latvia, Switzerland, Mozambique, Russia, Botswana, Bolivia, Burkina Faso, Australia, Kuwait, Namibia, Dominica, Cameroon, Haiti, Hungary. A well-built logistics system and a partnership network guide us to conduct our units anywhere in the earth immediately without compromising product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | NAAMS Standard | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQRL | A Configurable | P -Plain T -TiN | ||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head | A Lead Length Callout | Retractable | |||
APQ | 18 | 4 | R |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head | |||||
APQRL | T | A | 19 | - | A42 |
Type | D Head Callout | A Lead Length | Retractable | Coating (Optional) | B Rad | C Rad | |||||||
10 mm | 15 mm | 25 mm | 25 mm | 45 mm | 55 mm | 65 mm | 75 mm | ||||||
APQ (Hole h6) | 16 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | R -Retractable | None-Plain T- TiN | 2.0 | 48.0 |
18 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | |||
20 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | |||
25 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
30 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
35 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | |||
40 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 |
Type | Coating | Tip Shape | D Head Callout | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQRL (Hole-h6) | P-Plain T- TiN | A B C | 16 | 5 ~ 100 | 2.0 | 48.0 | 24.0 | D/2 |
18 | 38.0 | 19.0 | D/2 | |||||
20 | 38.0 | 19.0 | D/2 | |||||
25 | 50.0 | 25.0 | D/2 | |||||
30 | 50.0 | 25.0 | D/2 | |||||
35 | 50.0 | 25.0 | D/2 | |||||
40 | 50.0 | 25.0 | D/2 |