We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQ088R
Description
[NAAMS] Locating Pin With Cross Hole APQ Small Head
Stock availability:
On request
If you are looking for MISUMI APQ088R, make contact with FAMAGA, the world's leading supplier of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and personalseparate attention to each customer. We praise everyone, who cooperated with us - therefore, our regular purchasers receive the most convenient purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Syria, Mozambique, Canada, Bhutan, Mexico, Poland, Congo, Bangladesh, Mali, Burkina Faso, Antigua and Barbuda, Slovenia, Pakistan, Iraq, Gambia, United States, Russia, Guyana, Macedonia, Haiti, Australia, Eritrea, Laos, Angola, Fiji, Cyprus, Philippines, Sudan, Kuwait, Morocco, Egypt, Equatorial Guinea, Turkey, Panama, Israel, Mauritius, Denmark, Estonia, Luxembourg, United Arab Emirates, Suriname, Cape Verde, Ireland, Samoa, Tajikistan. A well-developed logistics system and a partnership network cheer us to send our units anywhere in the world promptly without damaging product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as to stay on the top.
To request or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | NAAMS Standard | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQRS | A Configurable | P -Plain T -TiN | ||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head Callout | A Lead Length Callout | Retractable | |||
APQ | 08 | 4 | R |
Part Number | ||||||||
Type | Coating | Tip Shape | D Head Call Out | A | ||||
APQRS | T | A | 08 | - | A42 |
Type | D Head Callout | A Lead Length | Retractable | Coating (Optional) | B Rad | C Rad | |||||||
10 mm | 15 mm | 25 mm | 35 mm | 45 mm | 55 mm | 65 mm | 75 mm | ||||||
APQ (Hole h6) | 08 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | R- Retractable | None-Plain T- TiN | 1.0 | 24.0 |
10 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 30.0 | |||
13 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 39.0 |
Type | Coating | Tip Shape | D Head Callout | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQRS (Hole-h6) | P-Plain T- TiN | A B C | 08 | 5 ~ 100 | 2.0 | 24.0 | 12.0 | D/2 |
10 | 30.0 | 15.0 | D/2 | |||||
13 | 39.0 | 19.5 | D/2 |