We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APERLTC19-A[10-100/1]
Description
[NAAMS] Locating Pin With Cross Hole APE Large Head
Stock availability:
On request
If you are pursuing MISUMI APERLTC19-A[10-100/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are outlined in the quality of merchandises and private attention to each buyer. We value everyone, who liased with us - thus, our regular buyers accept the most attractive purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4000 such clients, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Guinea-Bissau, Iran, South Sudan, El Salvador, Belgium, Canada, Bhutan, Madagascar, Sweden, Fiji, Georgia, Senegal, Jordan, Japan, Djibouti, The Bahamas, Tunisia, Hungary, Lithuania, Serbia, Afghanistan, Cameroon, Cape Verde, Morocco, Mali, Seychelles, Turkmenistan, South Korea, Armenia, Vietnam, Togo, Pakistan, Ghana, Russia, Greece, Dominica, India, Brunei, Tonga, Yemen, Mauritius, Algeria, Nepal, Ireland, Costa Rica, Panama, Croatia, Latvia. A well-built logistics system and a partnership network guide us to send our units anywhere in the earth immediately without disreputing product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this amount is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as stay in control.
To inquire or order, contact us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
APE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APERL | A Configurable | Front Hole | P -Plain T -TiN | ||
APESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||
Type | E Flat Callout | A Lead Length Callout | ||
APE | 19 | 4R |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APERL | T | A | 19 | - | A42 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating (Optional) | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | |||||||
APE (Slot -0.15) | 16 (15.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R- Retractable Front Hole S- Retractable Side Hole | None-Plain T- TiN | 16.35 | 2.0 | 48.0 |
19 (18.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19.27 | 2.0 | 38.0 | |||
25 (24.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | |||||||
APERL (Front Hole) APESL (Side Hole) (Slot- 0.15) | P -Plain T -TiN | A B C | 16 (15.85) | 10 ~ 100 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.85) | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.85) | 25.17 | 50.0 | 25.0 | D/2 |