We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APERLTA19-A[10-100/1]
Description
[NAAMS] Locating Pin With Cross Hole APE Large Head
Stock availability:
On request
If you are questing MISUMI APERLTA19-A[10-100/1], communicate with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are symbolized in the quality of products and personalseparate attention to each purchaser. We esteem everyone, who cooperated with us - thus, our regular clients pick up the most beneficial purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Dominican Republic, Uruguay, Angola, Georgia, Guinea, Romania, Saudi Arabia, Yemen, East Timor, El Salvador, Croatia, Iran, Cameroon, Guyana, Estonia, Fiji, North Korea, Kyrgyzstan, Namibia, Finland, Indonesia, Tonga, Serbia, Dominica, Moldova, Afghanistan, Ecuador, Seychelles, Mongolia, Togo, Cape Verde, United States, Senegal, The Gambia, Argentina, Mauritius, Iceland, Kuwait, Eswatini, Nepal, Zimbabwe, Bosnia and Herzegovina, Sweden, Mauritania, Tajikistan, Switzerland, Cyprus, Brunei. A well-developed logistics bond and a partnership network guide us to conduct our units anywhere in the earth immediately without compromising product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or order, contact us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
APE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APERL | A Configurable | Front Hole | P -Plain T -TiN | ||
APESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||
Type | E Flat Callout | A Lead Length Callout | ||
APE | 19 | 4R |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APERL | T | A | 19 | - | A42 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating (Optional) | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | |||||||
APE (Slot -0.15) | 16 (15.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R- Retractable Front Hole S- Retractable Side Hole | None-Plain T- TiN | 16.35 | 2.0 | 48.0 |
19 (18.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19.27 | 2.0 | 38.0 | |||
25 (24.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | |||||||
APERL (Front Hole) APESL (Side Hole) (Slot- 0.15) | P -Plain T -TiN | A B C | 16 (15.85) | 10 ~ 100 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.85) | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.85) | 25.17 | 50.0 | 25.0 | D/2 |