We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APE166S
Description
[NAAMS] Locating Pin With Cross Hole APE Large Head
Stock availability:
On request
If you are pursuing MISUMI APE166S, communicate with FAMAGA, the world's major vendor of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of merchandises and individual attention to each consumer. We respect everyone, who cooperated with us - therefore, our regular consumers procure the most beneficial purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Togo, Sweden, Syria, Estonia, Mexico, Guyana, Nicaragua, Kazakhstan, Macedonia, Samoa, Gambia, Georgia, Costa Rica, Sudan, Yemen, Liberia, Algeria, Mauritania, Angola, Laos, Monaco, Iraq, El Salvador, Chile, Panama, Albania, Australia, Jamaica, Jordan, Switzerland, Guatemala, Dominica, Bolivia, Malaysia, South Korea, South Sudan, Serbia, Kuwait, Morocco, Latvia, Zambia, Suriname, Cameroon, Tajikistan, Czech Republic. A well-built logistics network and a partnership network guide us to send our goods anywhere in the planet on-time without undermining product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as stay in control.
To inquire or place an order, contact us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
APE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APERL | A Configurable | Front Hole | P -Plain T -TiN | ||
APESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||
Type | E Flat Callout | A Lead Length Callout | ||
APE | 19 | 4R |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APERL | T | A | 19 | - | A42 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating (Optional) | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | |||||||
APE (Slot -0.15) | 16 (15.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R- Retractable Front Hole S- Retractable Side Hole | None-Plain T- TiN | 16.35 | 2.0 | 48.0 |
19 (18.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19.27 | 2.0 | 38.0 | |||
25 (24.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | |||||||
APERL (Front Hole) APESL (Side Hole) (Slot- 0.15) | P -Plain T -TiN | A B C | 16 (15.85) | 10 ~ 100 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.85) | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.85) | 25.17 | 50.0 | 25.0 | D/2 |