We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APE160S
Description
[NAAMS] Locating Pin With Cross Hole APE Large Head
Stock availability:
On request
If you are inspecting MISUMI APE160S, communicate with FAMAGA, the world's foremost distributor of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and particular attention to each user. We cherish everyone, who engaged with us - thus, our regular clients receive the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Botswana, Guinea-Bissau, Portugal, Guatemala, Sweden, Malaysia, Qatar, Uganda, Namibia, Poland, Malta, Togo, Palestine, Romania, Haiti, Cameroon, Monaco, Indonesia, Hungary, Philippines, South Sudan, Vietnam, Bulgaria, Peru, Burkina Faso, Japan, Djibouti, Kenya, Samoa, Latvia, Russia, Pakistan, Estonia, Swaziland, Panama, Mauritania, Tajikistan, Burundi, Syria, Israel, Georgia, Kiribati, Switzerland, Australia. A well-shaped logistics network and a partnership network assist us to conduct our products anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
APE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APERL | A Configurable | Front Hole | P -Plain T -TiN | ||
APESL | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||
Type | E Flat Callout | A Lead Length Callout | ||
APE | 19 | 4R |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APERL | T | A | 19 | - | A42 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating (Optional) | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | |||||||
APE (Slot -0.15) | 16 (15.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | R- Retractable Front Hole S- Retractable Side Hole | None-Plain T- TiN | 16.35 | 2.0 | 48.0 |
19 (18.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 19.27 | 2.0 | 38.0 | |||
25 (24.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 25.17 | 2.0 | 50.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | |||||||
APERL (Front Hole) APESL (Side Hole) (Slot- 0.15) | P -Plain T -TiN | A B C | 16 (15.85) | 10 ~ 100 | 16.35 | 2.0 | 48.0 | 24.0 | D/2 |
19 (18.85) | 19.27 | 38.0 | 19.0 | D/2 | |||||
25 (24.85) | 25.17 | 50.0 | 25.0 | D/2 |