We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APE108S
Description
[NAAMS] Locating Pin With Cross Hole APE Small Head
Stock availability:
On request
If you are seeking MISUMI APE108S, communicate with FAMAGA, the world's the best provider of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and private attention to each orderer. We cherish everyone, who collaborated with us - therefore, our regular purchasers obtain the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 3500 such customers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Sri Lanka, Morocco, El Salvador, Antigua and Barbuda, Oman, Syria, Ecuador, Netherlands, Guatemala, Egypt, The Bahamas, Angola, New Zealand, Tajikistan, Moldova, Seychelles, North Korea, Jamaica, Argentina, Monaco, Algeria, United States, South Korea, Fiji, Brunei, Haiti, Djibouti, Comoros, Kyrgyzstan, Kuwait, Belize, Albania, Nepal, Switzerland, Latvia, Malaysia, Belarus, Mauritius, United Arab Emirates, Peru, Lithuania, China, Iraq, Botswana, Paraguay, Poland, Togo. A well-built logistics chains and a partnership network assist us to ship our products anywhere in the world as soon as possible without damaging product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
APE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APERS | A Configurable | Front Hole | P -Plain T -TiN | ||
APESS | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | E Flat Callout | A Lead Length Callout | Retractable | |||
APE | 08 | 4 | R |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APERS | T | A | 08 | - | A42 | |||
APESS | P | C | 08 | - | A42 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating (Optional) | D Diameter | B Rad | C Rad | |||||||||
10 mm | 15 mm | 25 mm | 35 mm | 45 mm | 55 mm | 65 mm | 75 mm | 85 mm | 95 mm | |||||||
APE (Slot -0.15) | 06 (5.85) | 1 | 2 | 3 | 4 | 5 | 6 | - | - | - | R -Front Hole S -Side Hole | None-Plain T- TiN | 7.09 | 1.0 | 18.0 | |
08 (7.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | - | 8.81 | 1.0 | 24.0 | ||||
10 (9.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 10.63 | 2.0 | 30.0 | |||
13 (12.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 13.46 | 2.0 | 39.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | |||||||
APERS (Front Hole) APESS (Side Hole) (Slot-0.15) | P-Plain T- TiN | A B C | 6 (5.85) | 10 ~ 55 | 7.09 | 1.0 | 18.0 | 9.0 | D/2 |
8 (7.85) | 10 ~ 75 | 8.81 | 24.0 | 12.0 | D/2 | ||||
10 (9.85) | 10 ~ 100 | 10.63 | 2.0 | 30.0 | 15.0 | D/2 | |||
13 (12.85) | 13.46 | 39.0 | 19.5 | D/2 |