We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI ALB061M, catch up with FAMAGA, the world's central provider of mechanized equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and private attention to each orderer. We esteem everyone, who cooperated with us - hence, our regular purchasers pick up the most convenient purchase terms and discounts on the factory-made equipment market. At present, there are more than 4000 such clients, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Cuba, Chad, Albania, Kiribati, Equatorial Guinea, Laos, Congo, Mexico, Switzerland, New Zealand, Saudi Arabia, Thailand, Iraq, Zambia, China, Czech Republic, Slovakia, Cameroon, Russia, Ukraine, Iran, Ghana, The Gambia, Montenegro, United States, Lithuania, Moldova, Kazakhstan, Uzbekistan, Nigeria, Swaziland, Norway, Madagascar, Denmark, Mozambique, Ecuador, Cape Verde, Brazil, Hungary, Argentina, United Arab Emirates, Austria, Sudan, Uganda, Belarus. A well-shaped logistics system and a partnership network assist us to ship our goods anywhere in the planet immediately without damaging product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, phone us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | Material | Finish |
ALB /ALBFC | 1.0038 equiv. | Black Oxide |
ALB/ SALBFC | 1.4301 equiv. | - |
Dimension | Tol. | Finish | Geometric | ||
0.0 | �0.3 | 6.0μm | Surfaces | 0.015 T.I.R | |
0.00 | �0.03 | 3.0μm | |||
0.000 | �0.015 | 1.6μm |
Part Number | ||
Type | Specification | |
ALB | 060M | |
ALB | 061 | |
ALB | 560M |
Part Number | ||||||||||||||||
Type | Width | Thickness | A Length | B Length | Hole (M) | Dowel(D) | Hole (MA/NA) | Dowel(DA) | ||||||||
ALBFC | 25 | - | T10 | - | A90 | - | B65 | - | M8 | - | D8 | - | NA9 | - | DA6 | |
SALBFC | 20 | - | T19 | - | A110 | - | B110 | - | M10 | - | D6 | - | MA8 | - | DA8 |
Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
MA10 | NA11 | DA Dowel Hole (2) | M Tapped Hole (1) | D Dowel Hole (1) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 050M | 051M | 060M | 061M | 8 H6 | +0/+0.009 | M10 | 8 F7 | +0.013/0.028 | 25 | 70 | 50 | 20 | 10 | 5 |
Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
MA3/8 | NA13/32 | DA Dowel Hole (2) | M Tapped Hole (1) | D Dowel Hole (1) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 050 | 051 | 060 | 061 | 5/16 | +0/-0.0005 | 3/8-16 | '5/16 | +0/-0.0005 | 25 | 70 | 50 | 20 | 10 | 5 |
Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
MA8 | NA9 | DA Dowel Hole (2) | M Tapped Hole (1) | D Dowel Hole (1) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 560M | 561M | 562M | 563M | 8 H6 | +0/+0.009 | M8 | 8 F7 | +0.013/+0.028 | 20 | 70 | 50 | 20 | 10 | 5 |
Type | W Width | T Thickness (1mm inc.) | A Length (5mm inc.) | B Length (5mm inc.) | Hole Selection (1) | Hole Selection (A)/(2) | A1 | B1 | ||||
Hole Selection (1) | Dowel Hole (1) | Hole Selection (A) | Dowel Hole (2) | |||||||||
Tolerance | Tolerance | |||||||||||
ALBFC SALBFC | 20 25 | 14 ~ 20 (B1=5) 10 ~ 20 (B1≥20) | 65 - 120 | 50 - 120 B1=5 or B1≥20 | M8 M10 | D6 F7 D8 F7 | +0.010/+0.022 +0.013/+0.028 | NA9 NA11 MA8 MA10 | DA6 H6 DA8 H6 | +0/+0.008 +0/+0.009 | A-40-T | B-25-T B1=5 or B1≥20 |