We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI EXFGSD4-2-45, call FAMAGA, the world's major company of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each client. We cherish everyone, who worked with us - so, our regular consumers get the most acceptable purchase conditions and discounts on the industrial equipment market. Now, there are more than 3500 such customers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Bulgaria, Pakistan, Bosnia and Herzegovina, Armenia, Liberia, Slovenia, Mozambique, Estonia, Oman, Colombia, Ukraine, Russia, Cyprus, Guinea, Eritrea, Cape Verde, Uzbekistan, Syria, Mexico, Montenegro, Monaco, Namibia, Guyana, Nicaragua, North Korea, Switzerland, Yemen, China, Dominica, Haiti, Samoa, Nepal, Togo, Tunisia, Comoros, Tajikistan, Philippines, Australia. A advanced logistics link and a partnership network allow us to send our products anywhere in the world immediately without disreputing product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Max. Operating Pressure | |||||
Male/Female Threads | Both Ends Male Threads | Both Ends Female Threads | ||||||
Equal Dia. | Reducing | Equal Dia. | Reducing | Equal Dia. | Reducing | |||
- | EXTGBD | EXMGB | - | - | - | EN 1.0038 Equiv. | Black Oxide | 20.6MPa |
EXTG | EXTGD | EXMG | - | EXFG | EXFGD | Electroless Nickel Plating | ||
EXTGS | EXTGSD | EXMGS | EXMGSD | EXFGS | EXFGSD | EN 1.4305 Equiv. | - |
Part Number | - | T1 | - | L |
EXTG3 EXTGSD4 | - | 3 | - - | 30 40 |
Part Number | L Selection | R/Rc (PT) / M (Coarse) T1 / T2 | B | (C) | d | Unit Price | ||||||||
Type | No. | EXTG | EXTGS | |||||||||||
Equal Dia. EXTG EXTGS | 1 | 20 | 25 | 30 | 1/8 | 14 | 16.2 | 4.5 | ||||||
2 | 25 | 30 | 35 | 1/4 | 19 | 21.9 | 6.5 | |||||||
3 | 30 | 35 | 40 | 3/8 | 24 | 27.7 | 9.0 | |||||||
4 | 35 | 40 | 45 | 1/2 | 27 | 31.2 | 10.0 | |||||||
5 | 15 | 20 | M5 | 8 | 9.2 | 2.0 |
T1 | d |
M5 | 2.0 (3.0) |
R1/8 | 4.5 |
R1/4 | 6.5 |
R3/8 | 9.0 |
R1/2 | 10.0 |
T1 | d |
NPT1/8 | 4.5 |
NPT1/4 | 6.5 |
NPT3/8 | 9.0 |
NPT1/2 | 10.0 |
Part Number | M (Coarse) / R (PT) / NPT Selection | L Selection | Rc (PT)T2 | B | (C) | Unit Price | ||||||||
Type | No. | T1 | EXTGBD | EXTGD | EXTGSD | |||||||||
Reducing EXTGBD EXTGD EXTGSD | 1 | 5 (M5) 1N (NPT1/8) | 20 | 25 | 30 | 1/8 | 14 | 16.2 | ||||||
2 | 1 (1/8) 2N (NPT1/4) | 25 | 30 | 35 | 1/4 | 19 | 21.9 | |||||||
3 | 1 (1/8) 2 (1/4) 3N (NPT3/8) | 30 | 35 | 40 | 3/8 | 24 | 27.7 | |||||||
4 | 2 (1/4) 3 (3/8) 4N (NPT1/2) | 35 | 40 | 45 | 1/2 | 27 | 31.2 |
T1 | ? |
1/8 | 11 |
1/4 | 13 |
3/8 | 15 |
1/2 | 17 |
M5 | 6 |
Part Number | L | R (PT) / M (Coarse) T1 / T2 | B | (C) | d | ? | Unit Price | |||
Type | No. | Selection | EXMGB | EXMG | EXMGS | |||||
Equal Dia. EXMGB EXMG EXMGS | 1 | 10 15 20 | 1/8 | 14 | 16.2 | 4.5 | 10 | |||
2 | 1/4 | 19 | 21.9 | 6.5 | 10 | |||||
3 | 3/8 | 24 | 27.7 | 9.0 | 12 | |||||
4 | 1/2 | 27 | 31.2 | 10.0 | 17 | |||||
5 | 5 10 15 | M5 | 8 | 9.2 | 3.0 | 7.5 |
Part Number | M (Coarse) / R (PT) / NPT Selection | L Selection | R (PT)T2 | B | (C) | ? | d | Unit Price | |
Type | No. | T1 | |||||||
Reducing EXMGSD | 1 | 5 (M5) 1N (NPT1/8) | 10 15 20 | 1/8 | 14 | 16.2 | 10 | 3 | |
2 | 1 (1/8) 2N (NPT1/4) | 1/4 | 19 | 21.9 | 10 | 4.5 | |||
3 | 1 (1/8) 2 (1/4) 3N (NPT3/8) | 3/8 | 24 | 27.7 | 12 | 4.5 | |||
4 | 2 (1/4) 3 (3/8) 4N (NPT1/2) | 1/2 | 27 | 31.2 | 17 | 6.5 |
Part Number | L Selection | Rc (PT) / M (Coarse) T1 / T2 | B | (C) | d | Unit Price | ||||||||
Type | No. | EXFG | EXFGS | |||||||||||
Equal Dia. EXFG EXFGS | 1 | 20 | 25 | 30 | 1/8 | 14 | 16.2 | 8.2 | ||||||
2 | 25 | 30 | 35 | 1/4 | 19 | 21.9 | 10.9 | |||||||
3 | 30 | 35 | 40 | 3/8 | 24 | 27.7 | 14.4 | |||||||
4 | 35 | 40 | 45 | 1/2 | 27 | 31.2 | 18.0 | |||||||
5 | 15 | 20 | 25 | M5 | 8 | 9.2 | 4.2 |
Part Number | M (Coarse) / R (PT) / NPT Selection | L Selection | Rc (PT)T2 | B | (C) | d | Unit Price | |||||||
Type | No. | T1 | EXFGD | EXFGSD | ||||||||||
Reducing EXFGD EXFGSD | 1 | 5 (M5) 1N (NPT1/8) | 20 | 25 | 30 | 1/8 | 14 | 16.2 | 4.2 | |||||
2 | 1 (1/8) 2N (NPT1/4) | 25 | 30 | 35 | 1/4 | 19 | 21.9 | 8.2 | ||||||
3 | 1 (1/8) 2 (1/4) 3N (NPT3/8) | 30 | 35 | 40 | 3/8 | 24 | 27.7 | 8.2 | ||||||
4 | 2 (1/4) 3 (3/8) 4N (NPT1/2) | 35 | 40 | 45 | 1/2 | 27 | 31.2 | 10.9 |