We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APBTA-T1-G1-G1
Description
Conversion Pipe Fittings/L-Shape/T-Shape
Stock availability:
On request
If you are pursuing MISUMI APBTA-T1-G1-G1, call FAMAGA, the world's principle retailer of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of products and special attention to each consumer. We value everyone, who worked with us - therefore, our regular buyers obtain the most beneficial purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Brazil, Georgia, Cuba, El Salvador, Mexico, Madagascar, Eritrea, United Arab Emirates, Cyprus, Colombia, Nicaragua, Tunisia, The Bahamas, Netherlands, Turkmenistan, Benin, Tanzania, Serbia, Syria, Mozambique, Fiji, Ghana, Angola, Afghanistan, Pakistan, Ireland, Jamaica, Croatia, Yemen, Antigua and Barbuda, Brunei, Laos, Zimbabwe, Argentina, Dominica, Andorra, Djibouti, Vietnam, East Timor, Finland, South Korea, Moldova. A well-built logistics link and a partnership network cheer us to deliver our products anywhere in the planet with no delay without discrediting product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Max. Operating Pressure | |
L-Shaped | T-Shaped | |||
APBLM | APBTM | EN 1.0038 Equiv. | Electroless Nickel Plating | 20.6MPa |
APBLS | APBTS | EN 1.4301 Equiv. | - | |
APBLA | APBTA | Aluminum Alloy 5000 series | - | 1MPa |
Part Number | - | Thread Shape | - | Thread Shape | - | Thread Shape |
APBLM APBTA | - - | T1 T1 | - - | T2 M5 | - | M5 |
Part Number | Thread Shape | No. | T (PT) G (PF) N (NPT) | Thread Shape | No. | T (PT) G (PF) N (NPT) | L | A | B | E | F | Unit Price | ||
Type | APBLM | APBLS | APBLA | |||||||||||
APBLM (EN 1.0038 Equiv.) APBLS (EN 1.4301 Equiv.) APBLA (Aluminum Alloy 5000 series) | T (PT) G (PF) N (NPT) | 1 | 1/8 | - | M5 | - | 25 | 25 (30) | 25 (30) | 12.5 | 12.5 (15) | |||
T (PT) G (PF) N (NPT) | 1 | 1/8 | 25 | 25 (30) | 25 (30) | 12.5 | 12.5 (15) | |||||||
2 | 1/4 | 30 | 30 | 30 | 15 | 15 | ||||||||
2 | 1/4 | - | M5 | - | 30 | 30 | 30 | 15 | 15 | |||||
T (PT) G (PF) N (NPT) | 1 | 1/8 | 30 | 30 | 30 | 15 | 15 | |||||||
2 | 1/4 | 35 | 35 (40) | 35 (40) | 17.5 | 17.5 (20) | ||||||||
3 | 3/8 | 40 | 40 | 40 | 20 | 20 | ||||||||
3 | 3/8 | 2 | 1/4 | 40 | 40 | 40 | 20 | 20 | ||||||
3 | 3/8 | 40 | 40 | 40 | 20 | 20 | ||||||||
4 | 1/2 | 50 | 50 | 50 | 25 | 25 | ||||||||
4 | 1/2 | 3 | 3/8 | 50 | 50 | 50 | 25 | 25 | ||||||
4 | 1/2 | 50 | 50 | 50 | 25 | 25 |
Part Number | Thread Shape | No. | T (PT) G (PF) N (NPT) | Thread Shape | No. | T (PT) G (PF) N (NPT) | Thread Shape | No. | T (PT) G (PF) N (NPT) | L | A | B | E | F | Unit Price | ||
Type | APBTM | APBTS | APBTA | ||||||||||||||
APBTM (EN 1.0038 Equiv.) APBTS (EN 1.4301 Equiv.) APBTA (EN AW-5052 Equiv.) | T (PT) G (PF) N (NPT) | 1 | 1/8 | - | M5 | - | - | M5 | - | 25 | 25 (30) | 25 (30) | 12.5 | 12.5 (15) | |||
T (PT) G (PF) N (NPT) | 1 | 1/8 | T (PT) G (PF) N (NPT) | 1 | 1/8 | 25 | 25 (30) | 25 (30) | 12.5 | 12.5 (15) | |||||||
2 | 1/4 | 1 | 1/8 | 30 | 30 | 30 | 15 | 15 | |||||||||
2 | 1/4 | 30 | 30 | 30 | 15 | 15 | |||||||||||
2 | 1/4 | - | M5 | - | - | M5 | - | 30 | 30 | 30 | 15 | 15 | |||||
T (PT) G (PF) N (NPT) | 1 | 1/8 | T (PT) G (PF) N (NPT) | 1 | 1/8 | 30 | 30 | 30 | 15 | 15 | |||||||
2 | 1/4 | 1 | 1/8 | 30 | 30 | 30 | 15 | 15 | |||||||||
2 | 1/4 | 35 | 35 (40) | 35 (40) | 17.5 | 17.5 (20) | |||||||||||
3 | 3/8 | 2 | 1/4 | 40 | 40 | 40 | 20 | 20 | |||||||||
3 | 3/8 | 40 | 40 | 40 | 20 | 20 | |||||||||||
3 | 3/8 | 2 | 1/4 | 1 | 1/8 | 40 | 40 | 40 | 20 | 20 | |||||||
2 | 1/4 | 40 | 40 | 40 | 20 | 20 | |||||||||||
3 | 3/8 | 2 | 1/4 | 40 | 40 | 40 | 20 | 20 | |||||||||
3 | 3/8 | 40 | 40 | 40 | 20 | 20 | |||||||||||
4 | 1/2 | 3 | 3/8 | 50 | 50 | 50 | 25 | 25 | |||||||||
4 | 1/2 | 50 | 50 | 50 | 25 | 25 | |||||||||||
4 | 1/2 | 3 | 3/8 | 2 | 1/4 | 50 | 50 | 50 | 25 | 25 | |||||||
3 | 3/8 | 50 | 50 | 50 | 25 | 25 | |||||||||||
4 | 1/2 | 3 | 3/8 | 50 | 50 | 50 | 25 | 25 | |||||||||
4 | 1/2 | 50 | 50 | 50 | 25 | 25 |