We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI RTCNL8-2, contact FAMAGA, the world's main producer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of outcomes and special attention to each user. We respect everyone, who engaged with us - therefore, our regular consumers receive the most acceptable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 600 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Seychelles, North Korea, Namibia, Thailand, Laos, Nicaragua, South Sudan, United Arab Emirates, Paraguay, United States, Algeria, Brunei, Chad, East Timor, Sweden, Burma, Guatemala, Bosnia and Herzegovina, India, Malta, Ecuador, Bolivia, Australia, Belarus, Liechtenstein, Tunisia, Mongolia, Kuwait, Kiribati, Haiti, Libya, Lithuania, The Gambia, Sudan, Madagascar, Argentina, Andorra, Bulgaria, Tanzania, Brazil, Mozambique, Slovakia, Norway, Rwanda, Afghanistan. A well-elaborated logistics network and a partnership network allow us to conduct our units anywhere in the globe on-time without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is ascending every day. We are happy that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | Nominal |
RTCN4 RHTCN6 | - - | M5 2 |
Part Number | Nominal | Thread Size M | A | B | L | P | E | Width Across H | Allowable Revolutions (min-1) | Rotary torque (N � cm) | Effective Sectional Area (mm2) | Mass (g) | Unit Price | Volume Discount Rate | |
Type | D | 1 ~ 9 pc(s). | 10~20 | ||||||||||||
RTCNL | 4 | M5 | M5 | 3 | 20.5 | 22.5 | 10 | 19.7 | 12 | 500 | 0.6 | 1.5 | 13 | ||
1 | R1 / 8 | 8 | 22 | 23 | 2.9 | 15 | |||||||||
6 | M5 | M5 | 3 | 23.3 | 26.5 | 12.5 | 22.8 | 14 | 500 | 1.2 | - | 20 | |||
1 | R1 / 8 | 8 | 24 | 26.2 | 7.5 | 19 | |||||||||
2 | R1 / 4 | 11 | 26 | 24 | |||||||||||
8 | 1 | R1 / 8 | 8 | 31.5 | 34.7 | 14.5 | 25.7 | 17 | 400 | 1.5 | 16.5 | 35 | |||
2 | R1 / 4 | 11 | 30.5 | 31.7 | 33 | ||||||||||
3 | R3 / 8 | 12 | 30.5 | 31.4 | 41 | ||||||||||
10 | 2 | R1 / 4 | 11 | 38.3 | 41 | 17.5 | 29.5 | 22 | 300 | 2.0 | 21 | 67 | |||
3 | R3 / 8 | 12 | 36.3 | 38.7 | 30 | 63 | |||||||||
Turning torque is the torque necessary for the joint to turn when it is free of compressed air pressure. |
Applicable Fluid | Air |
Operating Temperature Range* | 0~60�C |
Max. Operating Pressure | 1MPa |
Operating Vacuum Level | -100kPa |