We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
MDI 38 F / G
Category
Encoders (Angle sensors)
Description
optical encoders
Stock availability:
On request
If you are pursuing MD Micro Detectors MDI 38 F / G, call FAMAGA, the world's dominant distributor of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and special attention to each consumer. We respect everyone, who liased with us - therefore, our regular clients accept the most acceptable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Kazakhstan, Sri Lanka, The Bahamas, Cuba, Gambia, Sweden, Angola, Syria, Romania, Cape Verde, East Timor, Estonia, Slovenia, Suriname, Netherlands, Eritrea, Latvia, Japan, Sierra Leone, Cameroon, Luxembourg, Sudan, Burkina Faso, Zambia, North Korea, Benin, Brunei, Poland, Guyana, Morocco, Yemen, United Arab Emirates, Austria, Pakistan, Montenegro, Finland, Iceland, Samoa, Argentina, Peru, Costa Rica, Jamaica, Belarus, Djibouti, Zimbabwe. A well-shaped logistics network and a partnership network allow us to conduct our items anywhere in the earth as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is amounting every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as stay in control.
To inquire or place an order, get in touch with us or write to the online chat on our site. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Resolution | da 100 a 2500 ppr |
counting direction | A leads B clockwise (shaft view) |
max output frequency | 220 kHz |
Output type | push-pull / line driver |
Operating Voltage | 5/30 = 4,5 ... 30 V DC (reverse polarity protection) |
No-Load supply current | 800 mW |
max load current | 20 mA / channel |
Weight | 150 g |
Housing Material | PA66 glass fiber reinforced |
Operating temperature | -20° ... +70°C |
Storage temperature | -25° ... +70°C |
max shaft load | 5 N assiale / radiale |
Shaft diameter | ø 6* / 8* / 10 mm |
max rotation speed | 3000 rpm |
moment of inertia | 0,8 x 10-6 kgm2 |
starting torque at 20°c | < 0,01 Nm (IP 64) < 0,06 Nm (IP 65) |
shaft material | 1.4305 / AISI 303 stainless steel |
bearings | 2 ball bearings |
bearings life | 109 revolutions |
EMC compatibility | IEC 61000-6-2 IEC 61000-6-4 |
Shocks and vibrations | 10 G, 10 ... 2000 Hz (IEC 60068-2-6) |
Degree of protection | IP 64 (IEC 60529) IP 65 (IEC 60529) |