We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
UK6A/HN-0EUL
Category
Ultrasonic Sensors
Description
M18,NPN-NO/NC,M12Plug,Diff
Stock availability:
On request
If you are inspecting MD Micro Detectors UK6A/HN-0EUL, connect FAMAGA, the world's top company of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and special attention to each buyer. We appreciate everyone, who collaborated with us - so, our regular consumers pick up the most convenient purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, France, Mongolia, Dominica, Kazakhstan, Suriname, Burundi, Cuba, Malta, Swaziland, Andorra, Qatar, Ghana, Cape Verde, Tanzania, Benin, Guinea, Senegal, Romania, Egypt, Australia, Malawi, Gambia, Costa Rica, Monaco, Jordan, Bangladesh, Jamaica, Niger, Luxembourg, Georgia, Sudan, East Timor, Ecuador, Vietnam, Greece, Hungary, Serbia, Uruguay, Sierra Leone, Paraguay, Iran, Iceland, Denmark, Eswatini, India. A advanced logistics network and a partnership network allow us to send our elements anywhere in the world quickly without compromising product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To get some advice or make a request, call us by phone or write a message to the online chat on our site. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Distanza di rilevazione nominale | 300mm |
Deriva termica | ?5% |
Ripetibilita | 0,50% |
Angolo apertura fascio | 7° ± 2° |
Risoluzione | ?2mm |
Regolazione di sensibilita | Teach-in by wire |
Isteresi | 1% |
Compensazione termica | Yes |
Minima distanza di rilevamento (zona morta) | 40mm |
Errore di linearita | 1% |
Tipo di uscita | 1xNPN |
Frequenza di commutazione | 8Hz |
Tempo di risposta | 400ms |
Tensione di alimentazione | 10 - 30Vdc |
Assorbimento a vuoto | ?35mA @Val = 30V |
Corrente di carico | 100mA |
Corrente di perdita | 10?A @ 30Vcc |
Caduta di tensione in uscita | 2,2Vmax. @ IL=100 mA |
Massima ondulazione residua | 5% |
Indicatori LED | verde: echo - giallo:uscita |
Ritardo alla disponibilita | ?300ms |
Protezione al corto circuito | Si |
Protezione da inversione di polarita | Si |
Protezioni da sovratensioni impulsive | Si |
Dimensioni | M18 x 1 / L = 60,3mm |
Peso | 65g |
Materiale corpo | PBT corpo plastico |
Connessioni | M12 Plug |
Coppia di serraggio | 1Nm |
Temperatura operativa | - 20°C…+ 70°C |
Temperatura di stoccaggio | - 35°C…+ 80° C senza ghiaccio |
Frequenza del trasduttore | 300kHz |
Certificazioni | CE cULus |
Compatibilita elettromagnetica | IEC 60947-5-2 |
Urti e vibrazioni | IEC EN60947-5-2 / 7.4 |
Grado di Protezione | IP67 |
Accessori inclusi | 2 ghiere M18x1, 2 rondelle O 18 |