We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
AES/AN-3A
Category
Proximity sensors
Description
Ind.M8,NPN-NO,Cable,Sch-LD
Stock availability:
On request
If you are inspecting MD Micro Detectors AES/AN-3A, communicate with FAMAGA, the world's leading distributor of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are symbolized in the quality of products and individual attention to each buyer. We praise everyone, who conspired with us - thus, our regular consumers receive the most helpful purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, South Africa, Nigeria, Turkey, Costa Rica, Sudan, Myanmar, Qatar, Austria, Burundi, New Zealand, Dominica, Tanzania, Georgia, Liechtenstein, Kenya, Belarus, Iran, Turkmenistan, Bulgaria, Panama, Switzerland, Gambia, Namibia, Libya, Mali, Uruguay, Ukraine, Malaysia, Greece, South Sudan, Bangladesh, Haiti, Albania, Paraguay, Central African Republic, Equatorial Guinea, Swaziland, Iceland, Mauritania, India, Guatemala, North Korea, Sierra Leone, Malta, China. A well-developed logistics link and a partnership network assist us to send our elements anywhere in the world immediately without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Nominal sensing distance | 1,5mm |
Operanting distance | 0…1,21mm |
Standard target | 6,5x6,5mm FE360 |
Correction Factor | copper: 0,15 ± 10% / aluminium: 0,15 ± 10% / brass: 0,21 ± 10% / stainless steel: 0,56 ± 10% |
Thermal drift of Sr | < 10% |
Repeat Accuracy | 5% (UB 24V Ta=23°C ±5°C) |
Hysteresis | 1 … 20% |
Output type | NPN |
Output Function | NO |
Switching frequency | 7kHz |
Operating Voltage | 10 - 30Vdc |
No-Load supply current | ? 10mA |
Load current | ? 100mA |
Leakage current | ? 10?A |
Output voltage drop | ? 1,5V @100mA |
Max ripple content | ?10% |
LED indicators | Yellow LED output state |
Time delay before availability | ? 50ms |
Short-circuit protection | Yes (auto-reset) |
Reverse Polarity Protection | Yes |
Protection against inductive loads | Yes |
Dimensions | M8 x 1 / L = 20,3mm |
Mounting | Shielded |
Weight | 30g |
Housing Material | stainless steel AISI303 |
Connections | 2m PVC Cable |
Active Head Material | PBT |
Tightening torque | 5Nm |
Operating temperature | -25°C…+70°C |
Approvals | CE cULus |
EMC compatibility | IEC 60947-5-2 |
Shocks and vibrations | Vibration IEC 60068-2-6 / Shock IEC 60068-2-27 |
Degree of protection | IP 67 (EN60529) |
Supplied Accessories | 2 nuts M8x1 |