MD Micro Detectors V3M1/S0-4A8F
  MD Micro Detectors V3M1/S0-4A8F

We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

V3M1/S0-4A8F MD Micro Detectors

Manufacturer

MD Micro Detectors

Country

Italy

Part number

V3M1/S0-4A8F

Category

Proximity sensors

Description

M12,2wire AC/DC-NC,Cable,Ns-LD

Stock availability:

On request

49.94 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications V3M1/S0-4A8F

If you are looking for MD Micro Detectors V3M1/S0-4A8F, contact FAMAGA, the world's central provider of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and particular attention to each buyer. We cherish everyone, who conspired with us - so, our regular consumers receive the most acceptable purchase terms and discounts on the industrial equipment market. Today, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world . A well-shaped logistics chains and a partnership network cheer us to conduct our goods anywhere in the earth immediately without damaging product quality.

A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of industrial equipment.

All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.

To get some advice or place an order, phone us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features V3M1/S0-4A8F

Detection properties
Nominal sensing distance 6mm
Operanting distance 0…4,8mm
Standard target 18x18mm FE360
Correction Factor copper: 0,49 / aluminium: 0,54 / brass: 0,58 / stainless steel: 0,79
Thermal drift of Sr < 10%
Repeat Accuracy 5% (UB 24V Ta=23°C ±5°C)
Hysteresis 1 … 20%
Outputs
Output type MOSFET
Output Function NC (Vac) - NC/NO (Vdc)
Switching frequency 25Hz (AC) - 500Hz (DC)
Electrical data
Operating Voltage 20 - 250Vac - 50/60Hz - 20…250Vdc
Load current 600mA/150ms (AC/DC)
Leakage current 1mA (Vac) - 0,7mA (Vdc)
Output voltage drop Vibration IEC 60068-2-6 / Shock IEC 60068-2-27
Max ripple content ?10%
LED indicators Yellow LED output state
Time delay before availability 100ms
Short-circuit protection Yes
Impulsive Overvoltage Protection Yes
Inrush current 600mA/150ms (AC/DC)
0,1µF @Vmax - 1µF @Vmin 1µF @Vmax - 1µF @Vmin
Mechanical data
Dimensions M12 x 1 / L = 60mm
Mounting Unshielded
Weight 80g
Housing Material Nickel-plated brass
Connections 6Nm
Active Head Material PA4T
Tightening torque 5…140ma(Vac) - 5…200mA (Vdc)
Operating temperature -25°C…+70°C
Test/Approvals
Approvals CE cULus
EMC compatibility 2m PUR Cable
Shocks and vibrations IEC 60947-5-2
Degree of protection IP 67 (EN60529)
Accessories
Supplied Accessories 2 nuts M12x1