We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
V3K1/R0-4A8F
Category
Proximity sensors
Description
M18,2wire AC/DC-NO,Cable,Ns-LD
Stock availability:
On request
If you are looking for MD Micro Detectors V3K1/R0-4A8F, connect FAMAGA, the world's top producer of mechanized equipment. Our company has existed for more than ten years - these are years of experience, which are symbolized in the quality of products and private attention to each consumer. We admire everyone, who liased with us - so, our regular customers get the most helpful purchase forms and discounts on the industrial equipment market. At this time, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Malawi, Cape Verde, Serbia, Liberia, Mexico, Botswana, Burma, Slovenia, Zimbabwe, Palestine, Egypt, Eritrea, Papua New Guinea, East Timor, Uzbekistan, Panama, Mauritania, Syria, Brazil, Nicaragua, Jamaica, El Salvador, Benin, Macedonia, Indonesia, Kazakhstan, South Sudan, Equatorial Guinea, Swaziland, Suriname, Russia, Burkina Faso, Thailand, Sweden, Madagascar, Ireland, Togo, United States, Iraq, Philippines, China. A well-built logistics bond and a partnership network assist us to conduct our elements anywhere in the planet quickly without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this number is rising every day. We are happy that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Nominal sensing distance | 10mm |
Operanting distance | 0…8,1mm |
Standard target | 30x30mm FE360 |
Correction Factor | copper: 0,47 / aluminium: 0,51 / brass: 0,55 / stainless steel: 0,77 |
Thermal drift of Sr | < 10% |
Repeat Accuracy | 5% (UB 24V Ta=23°C ±5°C) |
Hysteresis | 1 … 20% |
Output type | MOSFET |
Output Function | NO (Vac) - NO/NC (Vdc) |
Switching frequency | 25Hz (AC) - 550Hz (DC) |
Operating Voltage | 20 - 250Vac - 50/60Hz - 20…250Vdc |
Load current | 600mA/150ms (AC/DC) |
Leakage current | 1mA (Vac) - 0,7mA (Vdc) |
Output voltage drop | Vibration IEC 60068-2-6 / Shock IEC 60068-2-27 |
Max ripple content | ?10% |
LED indicators | Yellow LED output state |
Time delay before availability | 100ms |
Short-circuit protection | Yes |
Impulsive Overvoltage Protection | Yes |
Inrush current | 600mA/150ms (AC/DC) |
0,1µF @Vmax - 1µF @Vmin | 1µF @Vmax - 1µF @Vmin |
Dimensions | M18 x 1 / L = 60mm |
Mounting | Unshielded |
Weight | 100g |
Housing Material | Nickel-plated brass |
Connections | 25Nm |
Active Head Material | PA4T |
Tightening torque | 5…140ma(Vac) - 5…200mA (Vdc) |
Operating temperature | -25°C…+70°C |
Approvals | CE cULus |
EMC compatibility | 2m PUR Cable |
Shocks and vibrations | IEC 60947-5-2 |
Degree of protection | IP 67 (EN60529) |
Supplied Accessories | 2 nuts M18x1 |