We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
BX80B/5P-0H3E
Category
Area Sensors
Description
Area Sen, H=70mm-6mm pitch,Rec
Stock availability:
On request
If you are pursuing MD Micro Detectors BX80B/5P-0H3E, communicate with FAMAGA, the world's prime provider of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of goods and individual attention to each purchaser. We esteem everyone, who worked with us - therefore, our regular consumers pick up the most desirable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Uzbekistan, Lithuania, Poland, Tunisia, Austria, Syria, Kazakhstan, Jordan, Iceland, Bolivia, Tanzania, Eswatini, Slovakia, Liechtenstein, Mali, Croatia, Kuwait, Algeria, East Timor, Georgia, India, Malaysia, Mozambique, Antigua and Barbuda, Azerbaijan, Armenia, Tajikistan, Iraq, Andorra, Argentina, Thailand, Belize, North Korea, El Salvador, Central African Republic, Paraguay, Sudan, Hungary, Brazil, Czech Republic, Uruguay. A well-elaborated logistics network and a partnership network assist us to ship our units anywhere in the world on-time without undermining product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or send a message to the online chat on our site. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Distanza di rilevazione nominale | 200mm … 500mm |
Deriva termica | ?10% |
Distanza tra i raggi | 6mm |
Altezza controllata | 70mm |
Minimo oggetto rilevabile | 1x70mm |
Numero di raggi | 12 |
Principio di funzionamento | ricevitore |
Tipo di uscita | PNP |
Funzione di uscita | NO/NC selezionabile |
Tensione di alimentazione | 12-24Vcc |
Assorbimento a vuoto | 50mA |
Corrente di carico | ?100mA |
Corrente di perdita | 10µA |
Caduta di tensione in uscita | ?1.2V IL =100 mA |
Massima ondulazione residua | ? 10% |
Indicatori LED | emettitore: verde (alimentazione) rosso (allarme sincronizzazione) giallo (stato uscita) - ricevitore: verde (alimentazione) rosso (allineamento) giallo (stato uscita) |
Ritardo alla disponibilita | 500ms |
Protezione al corto circuito | Si (auto reset) |
Protezione da inversione di polarita | Si |
Emissione | Led Infrarosso |
Immunita alla luce ambiente | 1.500 lux max. (lampada ad incandescenza), 4.500 lux max. (luce solare) |
Protezioni da sovratensioni impulsive | Si |
Dimensioni | 44mm x 120mm x 20mm |
Peso | 260 … 300g |
Materiale corpo | PBT |
Connessioni | M12 connettore maschio |
Materiale parte attiva | PC |
Coppia di serraggio | 25Nm |
Temperatura operativa | -25°C…+50°C (senza condensa) |
Temperatura di stoccaggio | -40°C…+80°C |
Certificazioni | CE |
Compatibilita elettromagnetica | IEC 60947-5-2 |
Urti e vibrazioni | IEC EN 60947-5-2 |
Grado di Protezione | IP67 |