We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
MDI 63 A / D
Category
Encoders (Angle sensors)
Description
optical encoders
Stock availability:
On request
If you are looking for MD Micro Detectors MDI 63 A / D, get in touch with FAMAGA, the world's key retailer of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and personalseparate attention to each consumer. We understand everyone, who engaged with us - so, our regular buyers bring in the most beneficial purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Chile, Spain, Bhutan, Myanmar, Kazakhstan, Gambia, The Bahamas, Paraguay, Kenya, Armenia, Iraq, Sweden, Azerbaijan, Australia, Iran, Monaco, Israel, Zambia, Eritrea, Indonesia, Turkmenistan, Lithuania, Malta, Afghanistan, Sudan, Brunei, Tonga, Austria, Rwanda, Equatorial Guinea, Slovakia, Greece, Turkey, The Gambia, Laos, Czech Republic, Bulgaria, Seychelles, Ukraine, Ireland, Belarus, Norway, Cyprus, India, Egypt. A well-built logistics system and a partnership network allow us to ship our elements anywhere in the world as soon as possible without damaging product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Risoluzione | da 100 a 2500 ppr |
Direzione di conteggio | A in anticipo su B con rotazione in senso orario (vista lato albero) |
Massima frequenza di utilizzo | 220 kHz |
Tipo di uscita | push-pull / line driver |
Tensione di alimentazione | 5/30 = 4,5 ... 30 V DC (con protezione inversione) |
Assorbimento a vuoto | 800 mW |
Massima corrente di carico | 20 mA per canale |
Peso | 350 g |
Materiale corpo | alluminio EN-AW 2011 |
Temperatura operativa | -25° ... +85°C |
Temperatura di stoccaggio | -25° ... +70°C |
Carichi ammessi sull'albero | 200 N |
Diametro albero | o 9,52 (3/8”) / 10 mm |
Massima velocita di rotazione | 6000 rpm (IP54) 3000 rpm / 70° C - 2000 rpm / 85° C (IP66) |
Momento d’inerzia | 1,5 x 10-6 kgm2 |
Coppia di spunto a 20°C | < 0,02 Nm (IP 54) < 0,06 Nm (IP 66) |
Materiale albero | acciaio inox 1.4305 / AISI 303 |
Cuscinetti | 2 cuscinetti a sfera |
Vita cuscinetti | 109 rivoluzioni |
Compatibilita elettromagnetica | IEC 61000-6-2 IEC 61000-6-4 |
Urti e vibrazioni | 50 G, 11 ms (IEC 60068-2-27) - 10 G, 10 ... 2000 Hz (IEC 60068-2-6) |
Grado di Protezione | X = IP 54 (IEC 60529) S = IP 66 (IEC 60529) |